[[Include(WikiToC)]]

= Resources, Services and APIs

Everything that Experimenters can interact with is referred to as a [wiki:Resources Resource]

To run an experiment, you will configure the resources that you need.

This includes:
* Compute
  * capable of having disk images loaded and saved
  * users can log into them with ssh after provisioning
* Software Defined Radios
  * FPGA images loaded with UHD
  * Radio paramaters controlled with UHD or other API
* RF Frontends
  * api to control switches, filters, and gain
* Network switches
  * connectivity defined with API
* Optical Devices
  * space switch, roadms, and other devices controlled with optical config service


Note, some resources will fall into more than one of the above categories, such as a compute machine with integrated SDR, like the [wiki:Hardware/sdr/usrp2974 USRP 2974]

== RF Control ==

A number of services is availabe for experimenters to manage various aspects of domains and resources. These include:

 * [wiki:Resources/Services/RFSwitch RF Switch] management service: service for management of RF switches in various sandbox nodes.
 * Node [wiki:Resources/Services/RFControl RF control] service: management of the RF front-end in large and medium outdoor nodes.

== SDR Control ==
* [wiki:Resources/Notes/KryptonUsage USRP 2974 Driver Installation and Access]
* [wiki:Resources/Notes/N310Usage USRP N310 Configuration and Access]
* [wiki:Resources/Notes/SerialConsole Node Serial Console]

== Compute Control ==
* [wiki:Resources/Images Disk Images]
* [wiki:Resources/Notes/LatencyTuning OS Latency Tuning]

== Network Control ==

== Optical Control ==

====  Resources ====
REFERENCE: J. Yu, C. Gutterman, A. Minakhmetov, M. Sherman, T. Chen, S. Zhu, G. Zussman, I. Seskar, and D. Kilper, “Dual use SDN controller for management and experimentation in a field deployed testbed,” in Proc. OSA OFC’20, T3J.3, 2020.

CONTACT: Jiakai Yu

More details in the attached slides.

=== SDN controller architecture ===

SDN controller core functionalities:
|| [[Image(SDN_CONTROL.png, width=1200px)]] ||

=== Transmission setup ===

COSMOS optical topology overview:

|| [[Image(COSMOS_optical_topology.png, width=1400px)]] ||

One of the default COSMOS Transmission setups is the ring network:

|| [[Image(RING_topo.png, width=1400px)]] ||
|| [[Image(default topo.png, width=1400px)]] ||

=== User JSON format request examples ===
==== Add a light-path through multiple ROADMs with RWA ====

{"Request_Class": "**addPathConnection**",
“direction": "bi-direction",		     
"source_node_ip": "1.1.1.1",	
"source_node_port": "1",			
"destination_node_ip": "1.1.1.2",	
"destination_node_port": "1",	
"connection_name": "cosmos",	
"connection_id": “1",			
"channel_id": "50"}	

==== Monitor WSS connection information of a ROADM ====

{"Request_Class": "**MonitorWSS**",         
"node_ip": "1.1.1.1"}	

==== Configure a single ROADM WSS connection ====

{"Request_Class": "**ConfigWSS**", 	
"node_ip": "1.1.1.1",	
"name": "cosmos",	
"module_id": "2",				
"connection_id": "1",				’
"input_port": "5101",				
"output_port": "5203",			
"start_freq": "194600.00",			
"end_freq": "194650.00",			
"attenuation": "4.0",				
"status": "in-service",			
"block": "false"}	

==== Set up cross-connections in Calient S320 ====

{"Request_Class": "**SetupCRS**",			
"crs": ["5.7.6>5.8.5","5.7.7>5.8.6"]}			
			
	

=== Page Map ===
[[TOC(Resources/*,inline,nonumbering,notitle,noheading,depth=3)]]