This tutorial contains instructions for running the openairinterface eNB and UE on various platforms.

== Prerequisites ==
1. Two nodes, with appropriate hardware, within RF range
1. Currently supported: USRP x310, USRP 2974, USRP b210
1. Load the image {{{omf-baseline-oai-1804.ndz}}} onto both nodes
1. Turn the nodes on
1. If graphical display is desired, enable x11 tunneling to console and then to nodes

== On node 1 ==
1. run /opt/oaiscripts/build_oai.sh to build for the current hardware and kernel
1. edit the file /opt/oaiscripts/run_enb.sh for the SDR in use, for example, set SDR IP addr and max gain
1. run /opt/oaiscripts/run_enb.sh

== On Node 2 ==
1. run /opt/oaiscripts/build_oai.sh to build for the current hardware and kernel
1. edit the file /opt/oaiscripts/run_ue.sh for the SDR in use, for example, set SDR IP addr and max gain
1. run /opt/oaiscripts/run_ue.sh