[[Include(WikiToC)]]

== Amarisoft 4G/5G System in weekshall.cosmos ==



=== Description ===
This tutorial contains instructions for setting up a 4G/5G network in weekshall.cosmos domain. Amarisoft software based eNb/gNb, MME run on the USRP-2974 

=== Prerequisites ===
In order to access the test bed, create a reservation and have it approved by the reservation service. Access to the resources is granted after the reservation is confirmed. Please follow the process shown on the COSMOS [wiki:GettingStarted getting started] page to get started. 

=== Resources required ===
1 USRP-2974, 1 COSMOS node with SIM8200 modem.
in [https://wiki.cosmos-lab.org/wiki/Architecture/Domains/cosmos_weekshall COSMOS Weeks hall] domain

=== Tutorial Setup ===

Follow the steps below to gain access to the [wiki:/Architecture/Domains/cosmos_sb1 Weeks hall console] and set up nodes with appropriate images. 
 1. If you don't have one already, sign up for a [https://www.cosmos-lab.org/portal-2/ COSMOS account]
 1. [wiki:/GettingStarted#MakeaReservation Create a resource reservation] on sandbox 1
 1. [wiki:/GettingStarted#LogintoyourReservation Login] into sandbox 1 console (console.sb1.cosmos-lab.org) with two SSH sessions. 
 1. Make sure all the resources in the domain are turned off:
{{{#!shell
omf tell -a offh -t system:topo:allres  
}}}
 For this tutorial we will be using a USRP-2974 sdr2-s1-lg1 and a COSMOS node srv1-in1. srv1-in1 has a [https://www.waveshare.com/sim8200-m2.htm Waveshare SIM8200 modem] attached over USB.
 1. Load amarisoft-2974.ndz on sdr2-s1-lg1
{{{#!shell
omf load -i amarisoft-2974.ndz -t sdr2-s1-lg1
}}}
{{{#!shell
omf load -i waveshare-sim8200.ndz -t srv1-in1
}}}
 1. Turn all the required resources on and check the status
{{{#!shell
omf tell -a on -t srv1-in1,sdr2-s1-lg1
}}}
{{{#!shell
omf stat -t system:topo:allres
}}}
 1. ssh to the nodes, use option -Y for using GUI.

=== Tutorial Execution ===
====Run the Amarisoft base station====
* Upon logging into sdr2-s1-lg1, run uhd_find_devices to check the USRP. 
* Run the MME
{{{
}}}
* Run the eNodeb
{{{
}}}

==== srv1-in1 ====
==== Test ====