[[Include(WikiToC)]] == Setting up a Virtual/Simulated Optical Network using the Mininet-Optical Software Emulator == This wiki page contains a tutorial for setting up an optical network using [https://mininet-optical.org Mininet-Optical]. This is a Mininet-Optical version of the tutorial at [wiki:Tutorials/Optical/Tutorial1]. It is intended to show how an experiment designed for the COSMOS testbed may be adapted for use in a software emulation environment, and how Mininet-Optical may be used to design experiments that will later be run on the COSMOS hardware testbed. Please refer to [wiki:Tutorials/Optical/Tutorial1] for comparison between the hardware and software testbed environments. Author: Bob Lantz Original Authors: Artur Minakhmetov, Telecom Paris : artur.minakhmetov[at]telecom-paris.fr\\ Craig Gutterman, Columbia University : clg2168[at]columbia.edu\\ Michael Sherman, Rutgers University : msherman[at]winlab.rutgers.edu\\ Jiakai Yu, University of Arizona : jiakaiyu[at]email.arizona.edu\\ Tingjun Chen, Columbia University: tc2668[at]columbia.edu\\ Change Log 26 July 2022: created new version for Mininet-Optical. ---- = Description = The COSMOS testbed enables creation and use of optical networks of various topologies. An example of how an optical network could be configured and used is provided. A simple experiment on switching of optical paths is described. ---- = Compute Nodes and ToR switch interfaces used = * Each compute node has 1 Ethernet interface: {{{ server1-eth0 server2-eth0 server2-eth0 }}} * There are three ToR Ethernet interfaces: {{{ tor1-eth111 tor2-eth112 tor3-eth113 }}} * and three WDM transceivers, with separate output and input ports: {{{ tor1-wdm320/321 tor2-wdm290/291 tor3-wdm310/311 }}} ---- = Experiment_1 Context = || [[Image(Experiment_1.png, width=500px)]] || Fig.1 Logical Topology of Experiment_1 The experiment consists of changing the light path from ToR1<-->ToR2 to ToR1<-->ToR3, representing changing of the light path in a C-RAN when “Client” wants to move its base-band processing from “Edge Cloud” to “Central Cloud”. Experiment includes 3 servers: {{{ server1 server2 server3 }}} Experiment includes 4 ROADMs: {{{ roadm1 (localhost:1831) roadm2 (localhost:1832) roadm3 (localhost:1833) roadm4 (localhost:1844) }}} 3 ToR interfaces are connected to the 3 servers: {{{ tor1-eth111 <--> server1 tor2-eth112 <--> server2 tor3-eth113 <--> server3 }}} 3 Ethernet interfaces and 3 WDM transceivers will be connected within the ToR switch: {{{ tor1-eth111 ; tor1-wdm320/321 (output/input) tor2-eth112 ; tor2-wdm290/291 (output/input) tor3-eth113 ; tor3-wdm310/311 (output/input) }}} We are assigning next wavelengths to the transceivers: {{{ 1553,30 nm 193,00 with bandwidth ~[192.95;193.05] Thz This corresponds to channel XX in Mininet-Optical's default channel grid. }}} ---- = Setting Up the Optical Topology = In the COSMOS optical testbed, all devices are connected to a Calient S320 space switch. This switch serves as a programmable patch panel that allows any port to be connected to any other port, enabling realization of arbitrary topologies with fast reconnection between experiments. It is possible to create a virtual space switch/programmable patch panel in Mininet-Optical to emulate the COSMOS optical testbed itself, but for this tutorial we will implement the topology using Mininet-Optical's topology API. The Mininet-Optical emulated network is created using a Python script, examples/cosmostutorial.py. Take a look at it now to see how the topology is implemented. The topology itself is created using Mininet's high-level topology template API. Specifically, we create a subclass of class Topo and override the build() method: {{{#!python class TutorialTopo( Topo ): ... def build( self ): }}} ROADMs and ToR switches are added using addSwitch() calls: {{{#!python # ROADMs NC = NetconfPortBase roadm4 = self.addSwitch('roadm4', cls=LROADM, netconfPort=NC+4) ... # ToR switches tor1 = self.addSwitch('tor1', cls=Terminal, transceivers=[('32', 0*dBm)]) ... }}} Servers are added using addHost calls: {{{#!python class TutorialTopo( Topo ): # Servers server1 = self.addHost('server1') ... }}} In Mininet, ports are created by specifying port numbers when we add links. (This is due to the underlying link emulation which uses Linux virtual Ethernet (veth) pairs.) Because of this, we need to specify the correct port numbers when we create the links. The base port numbers for a Lumentum ROADM20 are specified at the top of the file: {{{#!python # Lumentum Roadm20 Port numbering LINEIN, LINEOUT = 5101, 4201 ADD, DROP = 4100, 5200 }}} The server and ToR port numbers are as specified above. WDM fiber links are unidirectional and are added using wdmLink calls: {{{#!python # Inter-ROADM links # We put 22km of fiber between roadm2 and roadm3 # Default fiber length is 1m if not specified ... self.wdmLink(roadm2, roadm3, LINEOUT, LINEIN, spans=[22*km]) self.wdmLink(roadm3, roadm2, LINEOUT, LINEIN, spans=[22*km]) ... # ROADM add/drop 2 <-> ToR transceiver links self.wdmLink(tor1, roadm4, 320, ADD+2) self.wdmLink(roadm4, tor1, DROP+2, 321) }}} We can see that LINEOUT of roadm2 is connected to LINEIN of roadm3 and vice-versa, with a 22km length of fiber in between, corresponding to a fiber spool in the COSMOS testbed. Later, add/drop port 2 of roadm4 is connected to ports 320/321 of tor1 (output/input, respectively). Ethernet links are added sing addLink() calls: {{{#!python # Server<->ToR Ethernet links self.addLink(server1, tor1, port1=0, port2=1) self.addLink(server2, tor2, port1=0, port2=2) self.addLink(server3, tor3, port1=0, port2=3) }}} ---- WORK IN PROGRESS!!! ... = ROADMs Configuration = All of these configurations can be performed by Python scripts developed to work with the COSMOS test-bed. The Python commands send NETCONF commands to the ROADM. == Setting “Snake” Connection == Correct ROADM operation requires Line In port of a ROADM to always receive a light. That is why there is a dedicated transceiver (tengigabitethernet 1/33 on ToR) that sends light through all ROADMs by passing through loop-back connection on Calient S320 (port 5.5.1) and redirecting back, so the light is received on the same transceiver. This kind of connection is called “Snake”. In order maintain this “Snake” for “Experiment_1” next connections form Table 1 must be in place: 1,3,5,6,8,9. === tengigabitethernet 1/33/1 on ToR configuration === Snake Interface (to passe through all ROADMs in loop): 60 (DWDM Channel C60) 1529,55 nm 196,00 Thz with frequency range [195.95,196.05] Thz === MUX/DEMUX configuration === * ROADM 4: DEMUX IN/OUT port: 5101/5204 MUX IN/OUT port: 4104/4201 * ROADM 1: DEMUX IN/OUT port: 5101/5201 MUX IN/OUT port: 4101/4201 * ROADM 2: DEMUX IN/OUT port: 5101/5201 MUX IN/OUT port: 4101/4201 * ROADM 3: DEMUX IN/OUT port: 5101/5204 MUX IN/OUT port: 4104/4201 === ALS Disable Sequence (for 60 seconds) === 1. ROADM 4 booster, 2. ROADM 2 booster, 3. ROADM 3 booster, 4. ROADM 1 booster, == Setting “Experiment_1” Connections == === Configuring ToR1<->ToR2 Connection 1 === * ROADM 4: 1. Enable MUX port 4102 “From ToR 1” 2. Add Connection “Exp1-FromTor1” with Input/ Output Port 4102/4201 with bandwidth [192.95;193.05] (python add_connection.py 10.104.1.4 1 10 in-service false 4102 4201 192950 193050 5 Exp1-FromTor1) 3. Enable DEMUX port 5202 “Towards ToR 1” 4. Add Connection “Exp1-TorwardTor1” with I/O Port 5101/5202 (python add_connection.py 10.104.1.4 2 10 in-service false 5101 5202 192950 193050 5 Exp1-TorwardTor1) * ROADM 1: 5. Enable MUX port 4102 “From ToR 2” 6. Add Connection “From ToR 2” with I/O Port 4102/4201 with bandwidth [192.95;193.05] 7. Enable DEMUX port 5202 “Towards ToR 2” 8. Add Connection “Towards ToR 2” with I/O Port 5101/5202 === Configuting ToR1<->ToR3 Connection 2 === * ROADM 4 (Same As For Connection 1): 1. Enable MUX port 4102 “From ToR 1” 2. Add Connection “From ToR 1” with I/O Port 4102/4201 with bandwidth [192.95;193.05] 3. Enable DEMUX port 5202 “Towards ToR 1” 4. Add Connection “Towards ToR 1” with I/O Port 5101/5202 with bandwidth [192.95;193.05] * ROADM 1 : 5. Enable MUX port 4101 “Through Port” (enabled for Snake) 6. Add Connection “Through In” with I/O Port 4101/4201 with bandwidth [192.95;193.05] 7. Enable DEMUX port 5201 “Through Port” (enabled for Snake) 8. Add Connection “Through Out” with I/O Port 5101/5201 with bandwidth [192.95;193.05] * ROADM 2 (Same As For ROADM1): 9. Enable MUX port 4101 “Through Port” (enabled for Snake) 10. Add Connection “Through In” with I/O Port 4101/4201 with bandwidth [192.95;193.05] 11. Enable DEMUX port 5201 “Through Port” (enabled for Snake) 12. Add Connection “Through Out” with I/O Port 5101/5201 with bandwidth [192.95;193.05] * ROADM 3 (Same As For ROADM4): 13. Enable MUX port 4102 “From ToR 3” 14. Add Connection “From ToR 3” with I/O Port 4102/4201 with bandwidth [192.95;193.05] 15. Enable DEMUX port 5202 “Towards ToR 3” 16. Add Connection “Towards ToR 3” with I/O Port 5101/5202 with bandwidth [192.95;193.05] ---- = Network Interfaces Configuration for Experiment_1 = == Setting Up ToR switch with 3 logical ToR switches == 1. Preparing the interfaces to be set as VLAN switch ports: {{{ sw-tor-lg1#configure sw-tor-lg1(conf)#interface twentyFiveGigE 1/1/1 sw-tor-lg1(conf-if-tf-1/1/1)#switchport sw-tor-lg1(conf-if-tf-1/1/1)#no shutdown sw-tor-lg1(conf-if-tf-1/1/1)#exit sw-tor-lg1(conf)#interface twentyFiveGigE 1/1/2 sw-tor-lg1(conf-if-tf-1/1/2)#switchport sw-tor-lg1(conf-if-tf-1/1/2)#no shutdown sw-tor-lg1(conf-if-tf-1/1/2)#exit sw-tor-lg1(conf)#interface twentyFiveGigE 1/1/3 sw-tor-lg1(conf-if-tf-1/1/3)#switchport sw-tor-lg1(conf-if-tf-1/1/3)#no shutdown sw-tor-lg1(conf-if-tf-1/1/3)#exit sw-tor-lg1(conf)#interface tengigabitethernet 1/31/1 sw-tor-lg1(conf-if-te-1/31/1)#switchport sw-tor-lg1(conf-if-te-1/31/1)#no shutdown sw-tor-lg1(conf-if-te-1/31/1)#exit sw-tor-lg1(conf)#interface tengigabitethernet 1/29/1 sw-tor-lg1(conf-if-te-1/29/1)#switchport sw-tor-lg1(conf-if-te-1/29/1)#no shutdown sw-tor-lg1(conf-if-te-1/29/1)#exit sw-tor-lg1(conf)#interface tengigabitethernet 1/32/1 sw-tor-lg1(conf-if-te-1/32/1)#switchport sw-tor-lg1(conf-if-te-1/32/1)#no shutdown sw-tor-lg1(conf-if-te-1/32/1)#exit }}} 2. Assigning interfaces to VLANs {{{ sw-tor-lg1#configure sw-tor-lg1(conf)#interface vlan 121 sw-tor-lg1(conf-if-vl-121)#untagged twentyFiveGigE 1/1/1 sw-tor-lg1(conf-if-vl-121)#untagged tengigabitethernet 1/32/1 sw-tor-lg1(conf-if-vl-121)#exit sw-tor-lg1(conf)#interface vlan 122 sw-tor-lg1(conf-if-vl-122)#untagged twentyFiveGigE 1/1/2 sw-tor-lg1(conf-if-vl-122)#untagged tengigabitethernet 1/29/1 sw-tor-lg1(conf-if-vl-122)#exit sw-tor-lg1(conf)#interface vlan 123 sw-tor-lg1(conf-if-vl-123)#untagged twentyFiveGigE 1/1/3 sw-tor-lg1(conf-if-vl-123)#untagged tengigabitethernet 1/31/1 sw-tor-lg1(conf-if-vl-123)#exit sw-tor-lg1(conf)#exit }}} 3. Assigning a wavelength to transceivers: {{{ sw-tor-lg1#configure sw-tor-lg1(conf)#interface tengigabitethernet 1/32/1 sw-tor-lg1(conf-if-te-1/32/1)#wavelength 1553.3 sw-tor-lg1(conf-if-te-1/32/1)#exit sw-tor-lg1(conf)#interface tengigabitethernet 1/29/1 sw-tor-lg1(conf-if-te-1/29/1)#wavelength 1553.3 sw-tor-lg1(conf-if-te-1/29/1)#exit sw-tor-lg1(conf)#interface tengigabitethernet 1/32/1 sw-tor-lg1(conf-if-te-1/32/1)#wavelength 1553.3 sw-tor-lg1(conf-if-te-1/32/1)#exit sw-tor-lg1(conf)#exit }}} 4. Verify VLANs: {{{ sw-tor-lg1#show vlan Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring VLANs, P - Primary, C - Community, I - Isolated O - Openflow, Vx - Vxlan Q: U - Untagged, T - Tagged x - Dot1x untagged, X - Dot1x tagged o - OpenFlow untagged, O - OpenFlow tagged G - GVRP tagged, M - Vlan-stack i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged NUM Status Description Q Ports 121 Active U Te 1/32/1 U Tf 1/1/1 122 Active U Te 1/29/1 U Tf 1/1/2 123 Active U Te 1/31/1 U Tf 1/1/3 }}} == Configuring Compute Nodes (Servers srv1..3-lg1) == 1. Install net-tools: {{{#!shell-session sudo apt install net-tools }}} 2. Configure interfaces eo1 and assign IP addresses: {{{#!shell-session native@srv1-lg1:~$ sudo ifconfig eno1 192.168.1.1 netmask 255.255.255.0 native@srv2-lg1:~$ sudo ifconfig eno1 192.168.1.2 netmask 255.255.255.0 native@srv3-lg1:~$ sudo ifconfig eno1 192.168.1.3 netmask 255.255.255.0 }}} ---- = Perform Experiment_1 = 1. Establish Connection ToR1<->ToR2. 2. Try Ping from Srv1 to Srv2: {{{#!shell-session native@srv1-lg1:~$ ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.460 ms 64 bytes from 192.168.1.3: icmp_seq=2 ttl=64 time=0.423 ms }}} 3. Establish Connection ToR1<->ToR2. 4. Try Ping from Srv1 to Srv3.