Load the nodes with images:
{{{
omf load -i abhiadhikari-node-mob4-3.sb1.cosmos-lab.org-2023-10-27-21-13-48.ndz -t mob4-2
omf load -i abhiadhikari-node-mob4-2.sb1.cosmos-lab.org-2023-10-27-20-40-46.ndz -t mob4-1
}}}

`mob4-1` is the transmitter, and `mob4-2` is the receiver.

Within the console, make sure the PAAMs are activated properly:

`mob4-1`:

{{{
curl "http://rfdev-mob4-1.sb1.cosmos-lab.org:3000/array_mgmt/connect?dev_name=Local&ics=all&num_elements=16&txrx=tx&pol=h&theta=0&phi=0"
curl "http://rfdev-mob4-1.sb1.cosmos-lab.org:3000/array_mgmt/enable?dev_name=Local&ics=all&num_elements=16&txrx=tx&pol=h&theta=0&phi=0"
curl "http://rfdev-mob4-1.sb1.cosmos-lab.org:3000/array_mgmt/steer?dev_name=Local&theta=0&phi=0"
}}}

`mob4-2`:

{{{
curl "http://rfdev-mob4-2.sb1.cosmos-lab.org:3000/array_mgmt/connect?dev_name=Local&ics=all&num_elements=16&txrx=tx&pol=h&theta=0&phi=0"
curl "http://rfdev-mob4-2.sb1.cosmos-lab.org:3000/array_mgmt/enable?dev_name=Local&ics=all&num_elements=16&txrx=tx&pol=h&theta=0&phi=0"
curl "http://rfdev-mob4-2.sb1.cosmos-lab.org:3000/array_mgmt/steer?dev_name=Local&theta=0&phi=0"
}}}

Now create two terminals. `Terminal 1` will be used for `mob4-1`. `Terminal 2` will be used for `mob4-2`. 

Within `Terminal 1`, run:
{{{
ssh -Y root@mob4-1
}}}

Within `Terminal 2`, run:
{{{
ssh -Y root@mob4-2
}}}