COSMOS work flow process

Typical work process on COSMOS is shown below. This is suggested as a reference for first-time users. Registration and setting up the ssh client are a one-time process after which the basic work flow cycle begins. This work flow is shown below in an event flow figure.

Registration

In order to use the test bed you must register for an account. Registration can be done as an individual or an organization. To register as an individual use the ​new user registration form. Otherwise to register as a group or organization use ​this form here.

Setting up SSH client

Access to the COSMOS resources is done via SSH. How the SSH client is set up depends on the type of OS you are using. Please see Configuring SSH Keys for specific details.

1. Making a reservation

You'll need to allocated a set of nodes / resources at a specific date/time under your registered account name. This process is outlined here - create a reservation.

2. Log into testbed

Log into the console of your reserved domain. Once you're logged into the console you'll have access to all the resources under that domain.

3. Configure node / resources

Now you're ready to check and load images (ie. Linux operating system) onto the available resources - here.

4. Work / develop using nodes / resources

At this point you'll be able to all your resources are accessible. You should be able to log into the resource and start development. As an example refer to the basic usage tutorial for this process.

5. Save progress prior to reservation time ending

This is always optional In the case when you have made additions to the loaded image, you may want to save it prior to your reservation time ending. The saving process is described here. By saving the resource's image you can reload it at a later time and continue where you left off.