Changes between Version 10 and Version 11 of Hardware/antennas


Ignore:
Timestamp:
May 29, 2019, 12:33:55 AM (5 years ago)
Author:
jkol
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/antennas

    v10 v11  
    1010[[BR]]
    1111=== Directional (large node sector) ===
    12 The directional antennas are comprised of a horizontal array of four [attachment:RFSpace_TSA900_directional.pdf ultra-wideband antenna elements]. Each element is oriented in the vertical plane and spaced 3 inches (7.63mm) from its neighbor. The frequency range covered by the antennas is 900 MHz - 12 GHz. However, due to limitations in the power amplifiers, USRPs, and other RF front end components, the actual frequency ranges are 2.4 - 6 GHz for transmit (non-contiguous, see RF front end for details) and 900 MHz - 6 GHz for receive.
     12The directional antennas are comprised of a horizontal array of four [attachment:RFSpace_TSA900_directional.pdf ultra-wideband antenna elements]. Each element is oriented in the vertical plane and spaced 3 inches (7.63mm) from its neighbor. The frequency range covered by the antennas is 900 MHz - 12 GHz. However, due to limitations in the power amplifiers, USRPs, and other RF front end components, the actual frequency ranges are 2.4 - 6 GHz for transmit (non-contiguous, [wiki:hardware/rf-front-end see RF front end for details]) and 900 MHz - 6 GHz for receive.
    1313
    1414A GPS antenna is located near the transmit/receive antenna and provides the GPS signal to the USRPs in the node.
    … …  
    1919[[BR]]
    2020=== Omni-directional (medium node) ===
    21 The omni-directional antennas are comprised of four vertically oriented [attachment:MobileMark_RM-WHF_omni.pdf​ multi-band antennas] in a 6” (15.24 cm) 2x2 square pattern with a 14.25”x14.25” (36.2x36.2 cm) ground plane. The frequency range covered by the antennas is 1.7 - 6 GHz. However, due to limitations in the power amplifiers, USRPs, and other RF front end components, the actual frequency ranges are 2.4 - 6 GHz for transmit (non-contiguous, see RF front end for details) and 1.7 - 6GHz for receive.
     21The omni-directional antennas are comprised of four vertically oriented [attachment:MobileMark_RM-WHF_omni.pdf​ multi-band antennas] in a 6” (15.24 cm) 2x2 square pattern with a 14.25”x14.25” (36.2x36.2 cm) ground plane. The frequency range covered by the antennas is 1.7 - 6 GHz. However, due to limitations in the power amplifiers, USRPs, and other RF front end components, the actual frequency ranges are 2.4 - 6 GHz for transmit (non-contiguous, [wiki:rf-front-end see RF front end for details]) and 1.7 - 6GHz for receive.
    2222
    2323A GPS antenna is located in the middle and provides the GPS signal to the USRPs in the node.