Changes between Version 7 and Version 8 of Hardware/rf-front-end


Ignore:
Timestamp:
May 28, 2019, 7:54:52 PM (5 years ago)
Author:
jkol
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/rf-front-end

    v7 v8  
    1515||  5.0-5.9 GHz  ||
    1616The TX chains are user configurable for connection to either the USRP N310 or the USRP 2974. It is possible to have both chains connected to one USRP or one chain per USRP as follows:
    17 ||='''Antenna 1'''=||='''Antenna 2'''=||
    18 ||  N310 (RF0-TX)  ||  N310 (RF1-TX)  ||       
     17||='''Antenna 1'''=||='''Antenna 3'''=||
     18||  N310 (RF0-TX)  ||  N310 (RF1-TX)  ||
    1919||  N310 (RF0-TX)  ||  2974 (RF1-TX)  ||
    20 ||  2974 (RF0-TX)  ||  N310 (RF1-TX)  ||               
     20||  2974 (RF0-TX)  ||  N310 (RF1-TX)  ||
    2121||  2974 (RF0-TX)  ||  2974 (RF1-TX)  ||
     22
     23Please refer to the [wiki:hardware/antennas antenna section] for antenna specific details.
     24
    2225'''NOTE:''' USRP N310 ports RF2-TX and RF3-TX are not connected at all. They are 50 ohm terminated at the USRP and should not be used.
    2326
    … …  
    3740||  RF2-RX2  ||  4  || -17 dB (-6 dB splitter, -6 dB splitter, -5 dB splitter) ||
    3841||  RF3-RX2  ||  4  || -17 dB (-6 dB splitter, -6 dB splitter, -5 dB splitter) ||
     42
     43Please refer to the [wiki:hardware/antennas antenna section] for antenna specific details.
     44
    3945'''NOTE:''' Loss is “typical” value for reference only and does not take into account antenna gain or cable losses.