| 1 | [[Include(WikiToC)]] |
| 2 | |
| 3 | === Service: mmWave Array Management |
| 4 | |
| 5 | This service is used to manage various (IBM PAAM, Sivers 60 GHz and Itnerdigital MHU) mmWave arrays. |
| 6 | |
| 7 | Array parameters: |
| 8 | |
| 9 | * Name |
| 10 | * Number of antenna elements |
| 11 | * TX/RX |
| 12 | * Polarization |
| 13 | * Number of ICs |
| 14 | * |
| 15 | |
| 16 | ==== Connect |
| 17 | |
| 18 | Connect to the array and initialize it. |
| 19 | |
| 20 | {{{ |
| 21 | <service name="connect"> |
| 22 | <info>Connect to the array</info> |
| 23 | <args> |
| 24 | <arg isRequired="true" name="dev_name"> |
| 25 | <info>Device name; choices are: ['rfdev4-in1.sb1.cosmos-lab.org', 'rfdev4-in2.sb1.cosmos-lab.org', 'rfdev2-1.sb2.cosmos-lab.org', 'rfdev2-2.sb2.cosmos-lab.org']</info> |
| 26 | </arg> |
| 27 | <arg isRequired="false" name="ics"> |
| 28 | <info>PAAM ICs; choices are: ['all', '0', '1', '2', '3'] (default=all)</info> |
| 29 | </arg> |
| 30 | <arg isRequired="false" name="num_elements"> |
| 31 | <info>Number of Antenna Elements; 1 to 16 (default=1)</info> |
| 32 | </arg> |
| 33 | <arg isRequired="false" name="txrx"> |
| 34 | <info>TX/RX Mode Selection! Should be either tx (transmit) or rx (receive) (default=tx)</info> |
| 35 | </arg> |
| 36 | <arg isRequired="false" name="pol"> |
| 37 | <info>Polarization! Should be either h (horizontal) or v (vertical) (default=v)</info> |
| 38 | </arg> |
| 39 | <arg isRequired="false" name="verify"> |
| 40 | <info>Verification (boolean flag); Should be true/false (default=False)</info> |
| 41 | </arg> |
| 42 | </args> |
| 43 | </service> |
| 44 | }}} |
| 45 | |
| 46 | ==== Disconnect |
| 47 | |
| 48 | Disconnect the array from the control |
| 49 | |
| 50 | {{{ |
| 51 | <info>Disconnect from the array</info> |
| 52 | <args> |
| 53 | <arg isRequired="true" name="dev_name"> |
| 54 | <info>Device name; choices are: ['rfdev4-in1.sb1.cosmos-lab.org', 'rfdev4-in2.sb1.cosmos-lab.org', 'rfdev2-1.sb2.cosmos-lab.org', 'rfdev2-2.sb2.cosmos-lab.org']</info> |
| 55 | </arg> |
| 56 | </args> |
| 57 | </service> |
| 58 | }}} |
| 59 | |
| 60 | ==== Steer |
| 61 | |
| 62 | {{{ |
| 63 | <service name="steer"> |
| 64 | <info>Steer the array beam</info> |
| 65 | <args> |
| 66 | <arg isRequired="true" name="dev_name"> |
| 67 | <info>Device name; choices are: ['rfdev4-in1.sb1.cosmos-lab.org', 'rfdev4-in2.sb1.cosmos-lab.org', 'rfdev2-1.sb2.cosmos-lab.org', 'rfdev2-2.sb2.cosmos-lab.org']</info> |
| 68 | </arg> |
| 69 | <arg isRequired="True" name="theta"> |
| 70 | <info>Theta (Beam) Angle! Integer in range -60 to 60 (default=10)</info> |
| 71 | </arg> |
| 72 | <arg isRequired="True" name="phi"> |
| 73 | <info>Phi (Beam) Angle! Integer in range -10 to 10 (default=10)</info> |
| 74 | </arg> |
| 75 | </args> |
| 76 | </service> |
| 77 | }}} |
| 78 | |
| 79 | ==== Status |
| 80 | {{{ |
| 81 | <service name="status"> |
| 82 | <info>Get the status of the array</info> |
| 83 | <args> |
| 84 | <arg isRequired="true" name="dev_name"> |
| 85 | <info>Device name; choices are: ['rfdev4-in1.sb1.cosmos-lab.org', 'rfdev4-in2.sb1.cosmos-lab.org', 'rfdev2-1.sb2.cosmos-lab.org', 'rfdev2-2.sb2.cosmos-lab.org']</info> |
| 86 | </arg> |
| 87 | </args> |
| 88 | </service> |
| 89 | }}} |
| 90 | |
| 91 | ==== Cleanup |
| 92 | |
| 93 | {{{ |
| 94 | <service name="cleanup"> |
| 95 | <info>Cleanup and shutdown the array</info> |
| 96 | <args> |
| 97 | <arg isRequired="true" name="dev_name"> |
| 98 | <info>Device name; choices are: ['rfdev4-in1.sb1.cosmos-lab.org', 'rfdev4-in2.sb1.cosmos-lab.org', 'rfdev2-1.sb2.cosmos-lab.org', 'rfdev2-2.sb2.cosmos-lab.org']</info> |
| 99 | </arg> |
| 100 | </args> |
| 101 | </service> |
| 102 | }}} |
| 103 | |
| 104 | ==== Configure |
| 105 | {{{ |
| 106 | <service name="configure"> |
| 107 | <info>Configure the array</info> |
| 108 | <args> |
| 109 | <arg isRequired="true" name="dev_name"> |
| 110 | <info>Device name; choices are: ['rfdev4-in1.sb1.cosmos-lab.org', 'rfdev4-in2.sb1.cosmos-lab.org', 'rfdev2-1.sb2.cosmos-lab.org', 'rfdev2-2.sb2.cosmos-lab.org']</info> |
| 111 | </arg> |
| 112 | <arg isRequired="false" name="ics"> |
| 113 | <info>PAAM ICs; choices are: ['all', '0', '1', '2', '3'] (default=all)</info> |
| 114 | </arg> |
| 115 | <arg isRequired="false" name="num_elements"> |
| 116 | <info>Number of Antenna Elements; 1 to 16 (default=1)</info> |
| 117 | </arg> |
| 118 | <arg isRequired="false" name="txrx"> |
| 119 | <info>TX/RX Mode Selection! Should be either tx (transmit) or rx (receive) (default=tx)</info> |
| 120 | </arg> |
| 121 | <arg isRequired="false" name="pol"> |
| 122 | <info>Polarization! Should be either h (horizontal) or v (vertical) (default=v)</info> |
| 123 | </arg> |
| 124 | <arg isRequired="false" name="theta"> |
| 125 | <info>Theta (Beam) Angle! Integer in range -60 to 60 (default=10)</info> |
| 126 | </arg> |
| 127 | <arg isRequired="false" name="phi"> |
| 128 | <info>Phi (Beam) Angle! Integer in range -10 to 10 (default=10)</info> |
| 129 | </arg> |
| 130 | <arg isRequired="false" name="verify"> |
| 131 | <info>Verification (boolean flag); Should be true/false (default=False)</info> |
| 132 | </arg> |
| 133 | </args> |
| 134 | </service> |
| 135 | }}} |
| 136 | |
| 137 | ==== Examples |
| 138 | |
| 139 | ===== Single command/static array operation |
| 140 | |
| 141 | {{{ |
| 142 | omf tell -a on -t rfdev4-in1.sb1.cosmos-lab.org |
| 143 | wget "http:5054/array_mgmt/configure\?dev_name=rfdev4-in1.sb1.cosmos-lab.org\&theta=16" |
| 144 | }}} |
| 145 | |
| 146 | This will set the antenna array in corner 1 with all 4 ICs each with 1 element and vertically polarized in TX mode with phi angle at (default) 10 degrees and theta angle at 16 degrees |
| 147 | |
| 148 | ===== Resetting the array and turning it off |
| 149 | |
| 150 | {{{ |
| 151 | wget "http:5054/array_mgmt/cleanup\?dev_name=rfdev4-in2.sb1.cosmos-lab.org" |
| 152 | omf tell -a offh -t rfdev4-in2.sb1.cosmos-lab.org |
| 153 | }}} |
| 154 | |
| 155 | |
| 156 | ===== Dynamic array management |
| 157 | |
| 158 | {{{ |
| 159 | omf tell -a on -t rfdev4-in1.sb1.cosmos-lab.org |
| 160 | wget "http:5054/array_mgmt/connect\?dev_name=rfdev4-in1.sb1.cosmos-lab.org" |
| 161 | ... |
| 162 | wget "http:5054/array_mgmt/steer\?dev_name=rfdev4-in1.sb1.cosmos-lab.org\&theta=11\&phi=10" |
| 163 | ... |
| 164 | wget "http:5054/array_mgmt/steer\?dev_name=rfdev4-in1.sb1.cosmos-lab.org\&theta=16\&phi=8" |
| 165 | ... |
| 166 | wget "http:5054/array_mgmt/steer\?dev_name=rfdev4-in1.sb1.cosmos-lab.org\&theta=22\&phi=0" |
| 167 | ... |
| 168 | wget "http:5054/array_mgmt/disconnect\?dev_name=rfdev4-in1.sb1.cosmos-lab.org" |
| 169 | ... |
| 170 | wget "http:5054/array_mgmt/cleanup\?dev_name=rfdev4-in1.sb1.cosmos-lab.org" |
| 171 | omf tell -a offh -t rfdev4-in1.sb1.cosmos-lab.org |
| 172 | }}} |