Changes between Version 6 and Version 7 of Tutorials/4G5G/Inter Digital-Edge Link

Timestamp:

Feb 12, 2021, 3:41:27 PM (4 years ago)

Author:

mackjx

Comment:

—

Tutorials/4G5G/Inter Digital-Edge Link

@@ -128 +128 @@
 
 == Start the ORCHESTRATOR ==
-The Orchestrator is a thin client application used to provision transport slices.  See Orchestrator User Guide for additional information.
+The Orchestrator is a thin client application used to provision transport slices, bandwidth reservation and service level agreements (SLA).  See Orchestrator User Guide for additional information.
 
 === Start the Thin Client Orchestrator ===
@@ -146 +146 @@
 localhost:8888/orchestrator
 }}}
-•       You should see the Customer Registration page as shown in Figure 6
+ * The Configuration Page as shown in Figure 6 should appear.
+
+[[Image( ONOS-Config.png, 400px)]]
+
+{{{#!shell-session
+Controller IP:                  where ONOS is running (via your localhost)
+Controller RPC Port:    8181 (this is the port at which ONOS UI is accessed)
+}}}
+  * Select the Save button
+
+•       Select the Customer Registration page as shown in Figure 7
 
 [[Image( ONOS-Register.png, 400px)]]
@@ -157 +167 @@
 
  *Select Register and you should receive a “Registration Successful” indication.
- * Select the Configuration Page as shown in Figure 7.
 
-[[Image( ONOS-Config.png, 400px)]]
-
-{{{#!shell-session
-NC IP:                  where ONOS is running (via your localhost)
-NC RPC Port:    8181 (this is the port at which ONOS UI is accessed)
-}}}
-  * Select the Save button
   * At this point you will be able to select from the operations displayed.  
   * Please refer to the Orchestrator User Manual for further directions and capabilities.