Changes between Initial Version and Version 1 of Tutorials/4G5G/weekshall


Ignore:
Timestamp:
Jul 22, 2022, 7:03:14 PM (2 years ago)
Author:
prasanthi
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Tutorials/4G5G/weekshall

    v1 v1  
     1[[Include(WikiToC)]]
     2
     3== Amarisoft 4G/5G SDR System ==
     4
     5
     6
     7=== Description ===
     8This tutorial contains instructions for running the [https://www.amarisoft.com/ amarisoft] 5G NR base station and UE simulator on USRP N310s in COSMOS SB1.
     9Amarisoft provides software based gNB, 5GCore (eNB,EPC) that run on commodity off-the-shelf devices. The software generates and sends baseband signals to the RF front-end for digital to analog conversion. Various RF front-ends are supported, including USRP N310, USRP X310.
     10In this tutorial, we run 5GCore, gNB on a server+USRP N310, and the UE simulator on another server+USRP N310 in COSMOS SB1, in stand-alone (SA) mode. The UE simulator can simulate one or more UEs, enabling experiments with large number of users connected to a base station.
     11
     12=== Prerequisites ===
     13In order to access the test bed, create a reservation and have it approved by the reservation service. Access to the resources is granted after the reservation is confirmed. Please follow the process shown on the COSMOS [wiki:GettingStarted getting started] page to get started.
     14
     15=== Resources required ===
     162 servers, 2 USRP N310s
     17in [https://wiki.cosmos-lab.org/wiki/Architecture/Domains/cosmos_sb1 COSMOS SB1] domain
     18
     19=== Tutorial Setup ===
     20
     21Follow the steps below to gain access to the [wiki:/Architecture/Domains/cosmos_sb1 sandbox 1 console] and set up nodes with appropriate images.
     22 1. If you don't have one already, sign up for a [https://www.cosmos-lab.org/portal-2/ COSMOS account]
     23 1. [wiki:/GettingStarted#MakeaReservation Create a resource reservation] on sandbox 1
     24 1. [wiki:/GettingStarted#LogintoyourReservation Login] into sandbox 1 console (console.sb1.cosmos-lab.org) with two SSH sessions.
     25 1. Make sure all the resources in the domain are turned off:
     26{{{#!shell
     27omf tell -a offh -t system:topo:allres 
     28}}}
     29 For this tutorial we will be using the SB1 servers, srv1-lg1, srv2-lg1 and USRP N310s, sdr1-md1, sdr1-s1-lg1
     30 1. Load amarisoft-tutorial-cosmos.ndz on srv1-lg1,srv2-lg1. 
     31{{{#!shell
     32omf load -i amarisoft-tutorial-cosmos.ndz -t srv1-lg1,srv2-lg1
     33}}}
     34 1. Turn all the required resources on and check the status
     35{{{#!shell
     36omf tell -a on -t srv1-lg1,srv2-lg1,sdr1-md1,sdr1-s1-lg1
     37}}}
     38{{{#!shell
     39omf stat -t system:topo:allres
     40}}}
     41 1. ssh to the nodes, use option -Y for using GUI.