Changes between Version 11 and Version 12 of Tutorials/Edge Computing/Alveo Getting Started

Timestamp:

Dec 6, 2019, 4:04:52 AM (5 years ago)

Author:

prasanthi

Comment:

—

Tutorials/Edge Computing/Alveo Getting Started

@@ -14 +14 @@
 == Execution ==
 
-=== Prepare the node ===
-
+[[CollapsibleStart(Prepare the node)]] 
  
 * Load alveo_runtime.ndz on a reserved server/node. This image comes with XRT(Xilinx Run Time) and Alveo U200 XDMA deployment shell installed.  
@@ -44 +43 @@
 
 [[CollapsibleStart(Validate Card and check shell installation)]] 
-* Check if the card is successfully installed and the if the firmware matches with the shell installed on the host. Run lspci command as shown below. If the card is successfully installed, two physical functions should be found per each card, one for management and one for user. 
+* Check if the card is successfully installed and if the firmware matches with the shell installed on the host. Run lspci command as shown below. If the card is successfully installed, two physical functions should be found per each card, one for management and one for user. 
 {{{
 root@node1-6:~# sudo lspci -vd 10ee: