Changes between Version 28 and Version 29 of Tutorials/Wireless/Basic Usage

Timestamp:

Jun 5, 2020, 12:40:49 AM (4 years ago)

Author:

prasanthi

Comment:

—

Tutorials/Wireless/Basic Usage

@@ -256 +256 @@
 * Set the localhost field to ''localhost:5002''. (Recall from the set up section to create a tunnel from localhost:5002 to sdr2-s1-lg1.sb1.cosmos-lab.org:9002 since the ''app_read_sdr_samples'' application has a websock server listening on that address:port.)
 
- Set the device type field is set to ''type=x300''.
+ Set the device type field to ''type=x300''.
 
  Click the ''connect'' button once and a "Websocket Connection" statement should be output by the application.
@@ -262 +262 @@
  Now click on ''make'' to create a device handle.
 
- The RF radio parameters are already populated with default values for 2.4 GHz WIFI band. To view other active spectrum bands change the RATE, FREQ, GAIN fields to
+ The RF radio parameters are already populated with default values for 2.4 GHz WIFI band. To view other active spectrum bands change the RATE, FREQ, GAIN fields.
 
  || RF Parameter || value || description || 
@@ -271 +271 @@
 
  Click on the ''Halted'' button to begin streaming samples from the radio to the browser. This should display the spectrum if all went well.
- || [[Image(basic_usage_spectrum_view_3.png, width=500px)]] ||
+ || [[Image(basic_usage_spectrum_wifi_sb1.png, width=500px)]] ||
 
 
 ==== Troubleshooting ====
-* Check the troubleshooting section in the [https://wiki.cosmos-lab.org/wiki/tutorials/krypton_usage Krypton usage page] for common errors.
+* Check the troubleshooting section in the [https://wiki.cosmos-lab.org/wiki/Tutorials/krypton_usage Krypton usage page] for common errors.