Changes between Version 24 and Version 25 of Tutorials/Wireless/mmwave Paam Link Rate

Timestamp:

Mar 26, 2024, 1:27:33 AM (8 months ago)

Author:

zhenzhou77

Comment:

—

Tutorials/Wireless/mmwave Paam Link Rate

@@ -138 +138 @@
     {{{#!shell
     <user_name>@console:~$ curl "http://am1.orbit-lab.org:5054/array_mgmt/configure?dev_name=rfdev2-1.sb2.cosmos-lab.org&ics=0&num_elements=16&txrx=tx&pol=h&theta=0&phi=0"
-    <user_name>@console:~$ curl "http://am1.orbit-lab.org:5054/array_mgmt/configure?dev_name=rfdev2-1.sb2.cosmos-lab.org&ics=0&num_elements=16&txrx=tx&pol=h&theta=0&phi=0"
-    <user_name>@console:~$ curl "http://am1.orbit-lab.org:5054/array_mgmt/configure?dev_name=rfdev2-1.sb2.cosmos-lab.org&ics=0&num_elements=16&txrx=tx&pol=h&theta=0&phi=0"
-    <user_name>@console:~$ curl "http://am1.orbit-lab.org:5054/array_mgmt/configure?dev_name=rfdev2-1.sb2.cosmos-lab.org&ics=0&num_elements=16&txrx=tx&pol=h&theta=0&phi=0"
-
-    }}}
-The following message will print out to indicate that the PAAM board is being successfully configured:
+    <user_name>@console:~$ curl "http://am1.orbit-lab.org:5054/array_mgmt/configure?dev_name=rfdev2-1.sb2.cosmos-lab.org&ics=0&num_elements=16&txrx=tx&pol=v&theta=0&phi=0"
+    <user_name>@console:~$ curl "http://am1.orbit-lab.org:5054/array_mgmt/configure?dev_name=rfdev2-2.sb2.cosmos-lab.org&ics=1&num_elements=16&txrx=rx&pol=h&theta=0&phi=0"
+    <user_name>@console:~$ curl "http://am1.orbit-lab.org:5054/array_mgmt/configure?dev_name=rfdev2-2.sb2.cosmos-lab.org&ics=1&num_elements=16&txrx=rx&pol=v&theta=0&phi=0"
+    }}}
+An example message will print out to after each command to indicate that the PAAM board is being successfully configured:
+    {{{#!shell
+<?xml version="1.0" encoding="UTF-8"?>
+<response status="OK">
+  <action service="array_mgmt" name="configure" ipaddr="10.116.5.2">
+    <step name="open" duration="3.780022"/>
+    <step name="initializaition" duration="0.125465"/>
+    <step name="enabling" duration="0.022732"/>
+    <step name="steering" duration="0.006349" theta="0" phi = "0" ipaddr = "10.116.5.2" />
+    <state PAAM_ID="0x23" LO_switch="PLL" if_sw1="0xF" if_sw2="0xF" if_sw3="0xF" if_sw4="0xF" txrx="rx" polarization="v" />
+    <adc>
+      <conv index="0" name="1v2" tADC="114" tVolt="0.279" tCurr="0.139"/>
+      <conv index="1" name="1v5" tADC="214" tVolt="0.523" tCurr="1.046"/>
+      <conv index="2" name="1v8" tADC="4" tVolt="0.010" tCurr="0.005"/>
+      <conv index="3" name="2v7_0" tADC="13" tVolt="0.032" tCurr="0.064"/>
+      <conv index="4" name="2v7_1" tADC="183" tVolt="0.447" tCurr="0.894"/>
+      <conv index="5" name="2v7_2" tADC="18" tVolt="0.044" tCurr="0.088"/>
+      <conv index="6" name="2v7_3" tADC="40" tVolt="0.098" tCurr="0.196"/>
+      <conv index="7" name="3v3_pll" tADC="303" tVolt="0.740" tCurr="0.370"/>
+      <conv index="8" name="5v_uzed" tADC="276" tVolt="0.674" tCurr="0.674"/>
+      <conv index="9" name="12v" tADC="140" tVolt="0.342" tCurr="1.140"/>
+      <conv index="10" name="0V" tADC="0" tVolt="0.000"/>
+      <conv index="11" name="1V8" tADC="735" tVolt="1.796"/>
+    </adc>
+    <step name="status" duration="0.069065"/>
+    <step name="close" duration="0.100179"/>
+  </action>
+</response>
+
+    }}}
 
 === Experiment Execution ===