Changes between Version 9 and Version 10 of Workshops/Sig Comm2022/group/labrador

Timestamp:

Aug 18, 2022, 8:59:52 PM (2 years ago)

Author:

jennyshane

Comment:

—

Workshops/Sig Comm2022/group/labrador

@@ -17 +17 @@
  NOTE: typically when using the testbed, you will have to reserve the domain you wish to use on the [https://www.orbit-lab.org/cPanel/controlPanel/start scheduler page]. We have already made the reservation for you.
 
- 2. Use OMF commands to load the baseline-sdr.ndz image on your resources.
+ 2. Use OMF commands to load the sigcomm2022-tutorial-image.ndz image on your resources.
 
  OMF is a command line utility that is run from the console in order to manage nodes: turn them on and off, save the contents of the hard disk as an "image", and load saved images back onto them.
@@ -40 +40 @@
  ssh root@node3-2
  }}}
+ {{{
+ ssh root@node8-7
+ }}}
  
 === Experiment Execution ===
 
-==== Configure and detect the radio ====
+==== Configure and detect the radio on both nodes ====
 
  1. Use {{{uhd_find_devices}}} to make sure that the onboard b210 SDR is detected as in the following image: