Changes between Version 2 and Version 3 of Workshops/Sig Comm2022/group/labrador

Timestamp:

Aug 10, 2022, 5:44:27 PM (2 years ago)

Author:

jennyshane

Comment:

—

Workshops/Sig Comm2022/group/labrador

@@ -26 +26 @@
  }}}
  The output of this command can be a little intimidating, but make sure you should look for confirmation that both of your nodes were successfully imaged. An example of the output is below, with the outcome of the loading process highlighted in red.
+ 
+ [[Image(wiki:Workshops/SigComm2022/group/labrador:load_example.png)]]
 
  3. Once the nodes are successfully imaged, turn them on and check the status
@@ -45 +47 @@
  1. Use {{{uhd_find_devices}}} to make sure that the onboard b210 SDR is detected:
 
- [[Image(find_devices.png)]]
+ [[Image(wiki:Workshops/SigComm2022/group/labrador:b210.png)]]
 
  Notice that running this command with no arguments will sometimes detect other SDR resources in the testbed which are reachable over the network. We can ignore those for now and focus just on the onboard b210.