Changes between Version 38 and Version 39 of Architecture/Domains/cosmos_sb1

Timestamp:

Sep 17, 2021, 4:39:28 PM (4 years ago)

Author:

jkol

Comment:

—

Architecture/Domains/cosmos_sb1

@@ -16 +16 @@
  * Indoor “benchtop” deployment:
   * [wiki:/Hardware/SubSystems/IDPerformance InterDigital 5G Performance (28 GHz) gNodeb and UE]
-  * USRP N310 and RFSoC based mmWave development setup that includes [wiki:/Hardware/SubSystems/IBM IBM 28 GHz PAAM], [wiki:/Hardware/SubSystems/IDMHU Interdigital MHU 28 GHz antenna array] and [wiki:Hardware/SubSystems/Sivers 60 GHz development platform] antennas that are mounted on an experimenter controlled movable platform.
+  * USRP X310, N310, and RFSoC based mmWave development setup that includes [wiki:/Hardware/SubSystems/IBM IBM 28 GHz PAAM], [wiki:/Hardware/SubSystems/IDMHU Interdigital MHU 28 GHz antenna array] and [wiki:Hardware/SubSystems/Sivers 60 GHz development platform] antennas that are mounted on an experimenter controlled movable platform.
  * Mobile devices:
   * USRP E312
@@ -65 +65 @@
 ==== RF Path Configurations for mmWave Development Platforms ====
 
-The indoor mmWave development platforms are connected to the USRP N310's and Xilinx RFSoC's as shown in the following example diagram:
+The indoor mmWave development platforms are connected to the USRP's and SDR's as shown in the following example diagram:
 
-  [[Image(mmwave-rf-block-diagram.png)]]
+  [[Image(mmwave-rf-block-diagram.png, 500px)]]
 
 To select a particular configuration, follow the instructions below for the specific setup you wish to use. It is possible to use multiple setups simultaneously as long as they do not conflict with respect to RF paths.
 
-===== USRP N310 with Sivers 60 GHz Array =====
+===== USRP X310 with Sivers 60 GHz Array =====
 Run the following commands on the sb1.cosmos-lab.org console:
 {{{
@@ -78 +78 @@
 }}}
 The resulting RF connections will be:
- ||= USRP N310 =||= Sivers Array=||
- ||  RF0 TX  ||  TX-I  ||
- ||  RF1 TX  ||  TX-Q  ||
- ||  RF0 RX2  ||  RX-I  ||
- ||  RF1 RX2  ||  RX-Q  ||
+ ||= USRP X310 =||= Sivers Array=||
+ ||  TX_A  ||  TX-I  ||
+ ||  TX_B  ||  TX-Q  ||
+ ||  RX_A  ||  RX-I  ||
+ ||  RX_B  ||  RX-Q  ||
 
 ===== Xilinx RFSoC ZCU111 with Sivers 60 GHz Array =====