Version 3 (modified by 6 years ago) ( diff ) | ,
---|
Table of Contents
Optical ¶
The optical connectivity layer in COSMOS allows an experimenter to reconfigure connectivity between devices at the L1 (physical) layer. This provides the ability to restructure the physical topology of the entire testbed, changing not just latency between nodes but how individual signals are routed, with no overhead, throughout the testbed.
Calient MEMS Space switch ¶
The Calient space switch is a 320x320 any-to-any MEMS optical circuit switch which allows an experimenter to redirect the entire optical link coming in from one fiber strand to another. The switch itself introduces ~2dB of loss to the signal and has a switching time of ~25ms. Configuration of the switch is possible via Openflow and netconf as well as several other methods.
Lumentum Whitebox20 ¶
20 port degree 1 ROADM C band DWDM Supports netconf
Attachments (12)
- COSMOS_Optical_v1.png (94.4 KB ) - added by 6 years ago.
- COSMOS_optical_core.jpg (853.6 KB ) - added by 5 years ago.
-
Cosmsos Fiber Diagram.png
(104.2 KB
) - added by 5 years ago.
Cosmos Fiber Diagram
- COSMOS optical topology_V7.png (203.1 KB ) - added by 5 years ago.
- COSMOS optical topology_V8.png (259.0 KB ) - added by 5 years ago.
- cosmos_long_reseach.png (1.2 MB ) - added by 5 years ago.
- cosmos_long_reseach_v2.png (1.2 MB ) - added by 5 years ago.
- COSMOS optical topology_V11.png (361.7 KB ) - added by 5 years ago.
- COSMOS optical topology_V12.png (99.8 KB ) - added by 5 years ago.
- Ryu Optical SDN User Guide.pptx (300.9 KB ) - added by 5 years ago.
- COSMOS optical_topology_V14.png (380.6 KB ) - added by 5 years ago.
-
default topo.png
(237.6 KB
) - added by 5 years ago.
default_ring_topo