Changes between Version 5 and Version 6 of Hardware/FR3

Timestamp:

Aug 14, 2025, 3:00:01 PM (3 weeks ago)

Author:

seskar

Comment:

—

Hardware/FR3

@@ -5 +5 @@
 This setup is designed for advanced wireless research and prototyping in FR3 frequency bands, supporting next-generation 5G/6G air interface and 2×2 MIMO experimentation.
 
-[[Image(FR3-BD.png, width=800px)]]
+[[Image(FR3-BD.png, width=1000px)]]
 
 As can be seen in the block diagram, the COSMOS FR3 experimental setup consists of two units each using a combination of USRP-2974 (Krypton) SDRs and Pi-Radio FR3 SDR front-end hardware. The Pi-Radio FR3 SDR units can be configured to operate across the entire 6 GHz to 24 GHz range, supporting experimentation in the full FR3 band.
@@ -23 +23 @@
 To facilitate remote configuration and operation, the FR3 hardware units offer a browser‑accessible web control interface as shown in the figure below. 
 
-[[Image(pi-browser.png, 400px)]]
+[[Image(pi-browser.png, 600px)]]
 
 Key features include:
 
 * Frequency settings:
-[[Image(pi-frequency.png, 400px)]]
+[[Image(pi-frequency.png, 600px)]]
 
 * Filters:
-[[Image(pi-filters.png, 400px)]]
+[[Image(pi-filters.png, 600px)]]
 
 * Gain: 
-[[Image(pi-gain.png, 400px)]]
+[[Image(pi-gain.png, 600px)]]
 
 * LO Supression:
-[[Image(pi-suppression.png, 400px)]]
+[[Image(pi-suppression.png, 600px)]]
 
 * Unit controls:
-[[Image(pi-control.png, 400px)]]
+[[Image(pi-control.png, 600px)]]