Changes between Version 1 and Version 2 of Resources/Notes/Krypton Usage


Ignore:
Timestamp:
May 15, 2019, 7:08:56 PM (6 years ago)
Author:
nilanjan
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Resources/Notes/Krypton Usage

    v1 v2  
    22
    33== Description ==
    4 A quick walk thru on how to install the PCIe driver for Krypton and start using the device.
     4A quick walk thru on how to install the PCIe driver for Krypton and start using the device. The Krypton is a stand-alone SDR with a host controller with radio portion  connected to the host via PCIe bus. The specifications for Krypton is [http://www.ni.com/documentation/en/usrp-software-defined-radio-stand-alone-device/latest/specs-usrp-2974/specs/ here].
    55
    66=== Installation of PCIe driver ===
    … …  
    7272
    7373
    74 === Most importantly if you made it this far ===
    75 If the Krypton host is rebooted, the driver modules are NOT automatically reloaded into the kernel. So the command ''/usr/local/bin/niusrprio_pcie start'' has to be run on the Krypton host everytime it is power-cycled or rebooted.
     74
     75'''Note:''' If the Krypton host is rebooted, the driver modules are NOT automatically reloaded into the kernel. So the command ''/usr/local/bin/niusrprio_pcie start'' has to be run on the Krypton host everytime it is power-cycled or rebooted.
    7676{{{
    7777root@sdr2-lg1:~# /usr/local/bin/niusrprio_pcie start