Changes between Version 4 and Version 5 of Tutorials/Wireless/FR3/Amarisoft


Ignore:
Timestamp:
Sep 16, 2025, 9:47:34 AM (3 days ago)
Author:
rifatbin
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Tutorials/Wireless/FR3/Amarisoft

    v4 v5  
    5252Use the Pi-Radio web UI Frequency panel on both rfdev pages (Tx and Rx) and set:
    5353
    54 * Low LO Frequency (GHz): 1.500000
    55 * High LO Frequency (GHz): 10.000000
    56 
    57 This example pairs a 1.5 GHz IF with a 10 GHz high-side LO (and a 1.5 GHz low-side LO) to place the RF tone at ~10 GHz, and back to 1.5 GHz on the receive path. (Exact placement depends on mixer sign/paths; the screenshot below shows the working settings used in this demo.) Leave Filters, Gain (except where noted), and LO Suppression at defaults for the first run.
     54* Low LO Frequency (GHz): 2.680000
     55* High LO Frequency (GHz): 12.000000
     56
     57This example pairs a 2.68 GHz IF with a 10 GHz high-side LO (and a 2.68 GHz low-side LO) to place the RF tone at ~12 GHz, and back to 2.68 GHz on the receive path. (Exact placement depends on mixer sign/paths; the screenshot below shows the working settings used in this demo.) Leave Filters, Gain (except where noted), and LO Suppression at defaults for the first run.
     58* rfdev-sdr1:
     59[[Image(amarisoft_web_interface.png, width=1000px)]]
     60* rfdev-sdr2:
     61[[Image(amarisoft_web_interface.png, width=1000px)]]
    5862
    5963[[CollapsibleStart(Run MME)]]