wiki:Tutorials/Wireless/FullDuplex

Version 23 (modified by mpk2138, 4 years ago) ( diff )

This wiki page contains tutorials for open-access remotely-accessible full-duplex (FD) transceivers integrated in the ORBIT and COSMOS testbeds. The full-duplex transceivers are currently being integrated into COSMOS. All the source code can be found at this GitHub page.

Authors:

  • Tingjun Chen, Columbia University: tc2668[at]columbia.edu
  • Manav Kohli, Columbia University: mpk2138[at]columbia.edu

Last updated: August 23, 2020

Full-Duplex Wireless in COSMOS

Description

In this tutorial, we will use the two integrated Gen-2 FD radios equipped with USRP N210s and the Gen-2 frequency-domain equalization (FDE) based RF canceller box. The testbed may be accessed via ssh. The PC contains several example experiments, which showcase the capabilities of the FD transceivers.

Figure 1: Gen-2 FDE Canceller Boxes in COSMOS Sandbox 2
Architecture of Gen 2 canceller box Gen 2 node mounted on rack
(a) The FlexICoN Gen-2 RF canceller Box (b) Rack-mounted, reorganized Gen-2 RF Canceller Box

Publications

For more information about the integration of the FDE-based FD transceivers in COSMOS, please read:

  1. Manav Kohli, Tingjun Chen, Mahmood Baraani Dastjerdi, Jackson Welles, Ivan Seskar, Harish Krishnaswamy, and Gil Zussman, “Open-access full-duplex wireless in the ORBIT and COSMOS testbeds,” in Proc. ACM MobiCom’20 Workshop on Wireless Network Testbeds, Experimental evaluation & CHaracterization (WiNTECH) (to appear) (invited), Sept. 2020 (Download)
  2. Tingjun Chen, Mahmood Baraani Dastjerdi, Jin Zhou, Harish Krishnaswamy, and Gil Zussman, “Wideband Full-Duplex Wireless via Frequency-Domain Equalization: Design and Experimentation,” in Proc. ACM MobiCom'19, Oct. 2019 (Download)

Please cite the above papers if you use the hardware. Please email Tingjun Chen (tc2668[at]columbia.edu) or Manav Kohli (mpk2138[at]columbia.edu) if you use (or plan to use) the full-duplex node or if you have any questions.

Updates

Hardware / Software Resources Utilized

  1. 2x The Columbia FlexICoN Gen-2 RF Canceller Boxes
  2. 2x USRP N210
  3. UHD version 3.14 and GNU Radio 3.7.13.5 are already installed on the PC.
  4. SUB-20 is a multi-interface USB adapter for providing popular interfaces between PC (USB host) and different hardware devices. Specifically, we use the SUB-20 SPI module to control and configure the Gen-1 RF canceller (see Fig. 1(a)). The user manual can be found here. We are currently working on integration of the SUB-20 control with GNU Radio.
  5. The Eigen C++ Library is used for basic algebra used in channel estimation and digital self-interference cancellation. The Eigen releases can be found on the this website. We use the latest stable release Eigen 3.3.4 through our testings and experiments.
  6. The source code for the FD example experiments can be found at this GitHub page.

COSMOS Sandbox 2

The Gen-2 FDE Canceller Boxes are integrated in COSMOS Sandbox 2 (sb2). The sandbox is located inside a lab at Columbia, allowing for a more controlled environment for the testing and evaluation of experimental hardware, such as the Gen-2 Canceller Boxes. The architecture of Sandbox 2, alongside its integration in the larger COSMOS testbed, is shown in Figure 2 below.

Figure 2: Architecture of COSMOS Sandbox 2
Sandbox 2 Architecture

Tutorial

Set Up

Before you can access the testbed, you need to make a reservation and get it approved. After receiving the reservation's confirmation (approval) email:

  • Login into the reserved domain: ssh -X username@console.sb2.cosmos-lab.org (the -X option is for enabling the X11 tunneling). Note: if connecting from macOS, the -Y flag may be needed instead of -X.
  • Login into the node: ssh -X sb2@10.109.250.10. The password is cosmossandbox2. After logging in into the node, a FD_Examples folder should exist under the home directory which contains some example experiments. Again, see above for using the -Y flag on macOS.
  • Check the conection and serial number of the USRP2s: uhd_find_devices. The serial numbers should be 316 and 321.

Running an example experiment

We can open GNU Radio using the following command:

gnuradio-companion &

If X-forwarding is setup correctly for your ssh session, the GNU Radio graphical user interface (GUI) program should open. If X-forwarding is not setup correctly, an error will display saying that the GUI window cannot be opened.

Open an example experiment from the ~/FD_Examples directory. The following experiments are available:

  • node_level_sic_fd_gui - Demonstrates node-level self-interference cancellation (SIC) and allows the experimenter to configure the RF canceller printed circuitboard (PCB).
  • ofdm_link_fd_gui - Creates an FD link between the two FD radios integrated in COSMOS.
  • prr_fd_gui - Computes the packet reception ratio (PRR) for an FD link.

If we open ofdm_link_fd_gui.grc, the following window will show:

Finally, clicking the grey-green play button will run the experiment!

Figure 3: An example FD experiment in the COSMOS testbed
(a) The GNU Radio flowgraph (b) The experiment GUI

Details on configuring the canceller PCB

Using the experiment node_level_sic_fd_gui, the experimenter can configure the RF canceller PCB using the experiment GUI. There are 12 sliders:

  • cap0, cap1, cap2 - these control the antenna tuner.
  • att0, att1 - The attenuator values for FDE tap 0 and tap 1. Higher values lead to greater attenuation.
  • dac0, dac1 - The phase shifter values for FDE tap 0 and tap 1.
  • cf0, cf1 - The center frequency for FDE tap 0 and tap 1. Higher values lead to lower center frequency.
  • qf0, qf1 - The quality factor for FDE tap 0 and tap 1. Higher values lead to lower quality factor.
  • canc_path - Determines whether the wideband FDE or narrowband Gen-1 canceller path is used. 0 = FDE, 1 = Gen-1.
  • att2 - The attenuator values for the Gen-1 path. Higher values lead to greater attenuation.
  • dac2 - The phase shifter values for the Gen-1 path.

The experiment GUI will show a visualization of the received power spectrum and self-interference (SI) channel. Using this, the experimenter can generate any desired RF SIC profile.

The GUI also provides a slider for the Tx/Rx delay. This setting is important for digital SIC performance, and the optimal value depends on the bandwidth used. For 10 MHz bandwidth, a delay of 40 should lead to the best digital SIC performance.

Acknowledgements

This work was supported in part by NSF grants ECCS- 1547406 and CNS-1827923, NSF-BSF grant CNS-1910757, DARPA RF-FPGA and SPAR programs, and a Facebook Fellowship. We thank Jelena Diakonikolas, Guy Farkash, Jakub Kolodziejski, Prasanthi Maddala, Jonathan Ostrometzky, Michael Sherman, and Jin Zhou for their contributions to various aspects of the project.

Full-Duplex Wireless in ORBIT

Description

In this tutorial, we'll use node11-10 in the main grid (equipped with a USRP N210) to transmit and receive a single tone over the air to demonstrate full-duplex wireless capability using the Columbia FlexICoN's Gen-1 Frequency-Flat Amplitude- and Phase-based RF Canceller. Pictures of the FlexICoN RF canceller and node11-10 in the main grid equipped with full-duplex capability are below:

Figure 1: The ORBIT-FlexICoN Full-Duplex Node
(a) The FlexICoN RF Canceller Box (b) Full-Duplex SDR at node11-10 in the ORBIT grid

Technical Report

For more information, please read:

Tingjun Chen, Mahmood Baraani Dastjerdi, Guy Farkash, Jin Zhou, Harish Krishnaswamy, and Gil Zussman, “Open-access full-duplex wireless in the ORBIT testbed,” arXiv preprint: 1801.03069v2 [cs.NI], May 2018. (arXiv report) (INFOCOM'18 Demo Abstract)

Please cite the above arXiv report if you use the hardware. Please email Tingjun Chen (tingjun [at] ee.columbia.edu) if you use (or plan to use) the full-duplex node or if you have any questions.

Updates

  • [04/30/2019]: New full-duplex SDR image flexicon-orbit-v3.ndz released. Main new feature includes the implementation of a real-time OFDM-based full-duplex node.
  • [01/31/2019]: Developed real-time digital SIC as a GNU Radio OOT module.
  • [04/05/2018]: New full-duplex SDR image flexicon-orbit-v2.ndz released. New features include (1) GNU Radio OOT module that controls the SUB-20 controller, and (2) integrated full-duplex PSK examples.
  • [02/28/2018]: PSK examples based on GNU Radio is now available. For more details, please refer to the INFOCOM'18 Demo Abstract.
  • [01/08/2018]: The baseline full-duplex SDR image flexicon-orbit-v1.ndz released. This node image includes an UHD benchmark full-duplex transciever example. For more details, please refer to the arXiv report.

Hardware / Software Resources Utilized

  1. The Columbia FlexICoN Gen-1 RF Canceller, which is a frequency-flat amplitude- and phase-based RF canceller implemented using discrete components on a PCB. The Gen-1 RF canceller is optimized to have a center operating frequency at 900MHz.
  2. The source code for the full-duplex transceiver examples, which can be found at this GitHub page. We have also built an ORBIT node image flexicon-orbit-v2.ndz with all the required software installed to facilitate the experiments.
  3. USRP N210 with node11-10 in the ORBIT main grid.
  4. SUB-20 is a multi-interface USB adapter for providing popular interfaces between PC (USB host) and different hardware devices. Specifically, we use the SUB-20 SPI module to control and configure the Gen-1 RF canceller (see Fig. 1(a)). The user manual can be found here. We also built a GNU Radio Out-Of-Tree (OOT) module to allow controlling the canceller from within the GNU Radio GUI.
  5. UHD and GNU Radio are already installed with the imaged SDR node.
  6. The Eigen C++ Library is used for basic algebra used in channel estimation and digital self-interference cancellation. The Eigen releases can be found on the this website. We used the latest stable release Eigen 3.3.4 through our testings and experiments.

Set Up

Before you can access the testbed, you need to make a reservation and get it approved. After receiving the reservation's confirmation (approval) email:

  • Login into reserved domain: ssh -X username@conslole.grid.orbit-lab.org (the -X option is for enabling the X11 tunneing)
  • Make sure that the full-duplex node is powered down for loading the desired image: omf tell -a offh -t node11-10
  • Load the most updated full-duplex node image (currently full-duplex SDR image flexicon-orbit-v3.ndz released) on the node (this process can take about a few minutes so please be patient): omf load -i flexicon-orbit-v3.ndz -t node11-10
  • Turn on the node: omf tell -a on -t node11-10
  • Login into the node: ssh -X root@node11-10. After login into the node, a flexicon_orbit folder should exist under the home directory of node11-10:~/ which contains the source code of this example. You can also retrieve the most recently updated code from the GitHub repository.
  • Configure the USRP Ethernet interface: ifconfig eth2 192.168.10.1 netmask 255.255.255.0 up
  • Run sudo sysctl -w net.core.rmem_max=50000000 and sudo sysctl -w net.core.wmem_max=50000000
  • Check the conection and serial number of the USRP N210: uhd_find_devices. The serial number should be F331D4.

Run the Experiments

You will need to login into the full-duplex node (by ssh root@node11-10) in two separate terminal windows lo for running the experiment: one for the main full-duplex transceiver UHD program and one for controlling the RF canceller.

Example Experiment 1: A Real-Time Full-Duplex Radio with OFDM PHY (GNU Radio + UHD)

  • Within the FD node (i.e., ssh -X root@node11-10, open the GNU Radio flowgraph ~/flexicon_orbit/fd_transceiver_ofdm/grc/ofdm_node_fd.grc in gnuradio-companion, as shown below.
GNU Radio flowgraph of the OFDM-based FD radio example experiment.
  • Run the experiments, three plots will show up: Time-domain Rx signal after RF SIC and digital SIC (@tab0), frequency-domain Rx signal after RF SIC and digital SIC (@tab1), and the estimated coefficients of the digital SI canceller taps (@tab2).
Time-domain and frequency-domain Rx signal after RF and digital SIC, and estimated digital SI canceller coefficients on the packet-level.

Example Experiment 2: A Simple Full-Duplex Radio Experiment (Terminal + UHD)

In Terminal 1

  • Prepare the Eigen library (you can skip this step since the image already contains the Eigen library):
    cd ~/flexicon_orbit/fd_transceiver_simple/
    sudo cp -r Eigen/ /usr/include/
    
  • Build the example (this is already done in the loaded image):
    cd ~/flexicon_orbit/fd_transceiver_simple/uhd/
    mkdir build
    cd build
    cmake ../
    make
    
  • Run the example with IQ rate rate, carrier frequency freq, TX gain tx-gain, and RX gain rx-gain:
    cd ~/flexicon_orbit/fd_transceiver_simple/uhd/build/
    ./fd_transceiver_simple --tx-args="serial=F331D4" --rx-args="serial=F331D4" --rate 1e6 --freq 900e6 --tx-gain 0 --rx-gain 10
    
    The default sine wave has an amplitude ampl=0.3 and wave frequency of 100kHz wave-freq=100e3, which corresponds to a 0dBm TX power level. This terminal window will show the power level at RX baseband, after RF cancellation (before digital) and after digital cancellation, respetively. The UHD program is calibrated with --rx-gain=10, other RX gain values may results in inaccurate power level computation.
  • An example temrinal output is below:
    root@node11-10:~/flexicon_orbit/fd_transceiver_simple/uhd/build# ./fd_transceiver_simple --tx-args="serial=F331D4" --rx-args="serial=F331D4" --rate 1e6 --freq 900e6 --tx-gain 0 --rx-gain 10
    linux; GNU C++ version 4.8.4; Boost_105400; UHD_003.010.001.001-0-unknown
    
    
    Creating the transmit usrp device with: serial=F331D4...
    -- Opening a USRP2/N-Series device...
    -- Current recv frame size: 1472 bytes
    -- Current send frame size: 1472 bytes
    
    .
    .
    .
    
    Press Ctrl + C to stop streaming...
    
    TX Stream time was: 0 full secs, 0.100064 frac secs
    
    RX Signal Power: -44.093768 dBm (N_FFt = 2048)
    RX Res Signal Power: -98.570747 dBm (N_fft = 1024)
    Amount of Digital SIC: 54.476979 dB
    
    RX Signal Power: -44.232740 dBm (N_FFt = 2048)
    RX Res Signal Power: -98.113147 dBm (N_fft = 1024)
    Amount of Digital SIC: 53.880407 dB
    
    RX Signal Power: -43.959299 dBm (N_FFt = 2048)
    RX Res Signal Power: -93.406544 dBm (N_fft = 1024)
    Amount of Digital SIC: 49.447245 dB
    
    RX Signal Power: -44.179891 dBm (N_FFt = 2048)
    RX Res Signal Power: -101.593147 dBm (N_fft = 1024)
    Amount of Digital SIC: 57.413256 dB
    
    In this example, since the TX power level is at 0dBm, a total amount of around 90dB self-interference cancellation is achieved, of which 45dB is obtained by the Gen-1 RF canceller, and 50dB is obtained by the digital cancellation.
In Terminal 2 (SUB-20)
  • Build the RF canceller configuration code (this is already done in the loaded image):
    cd ~/flexicon_orbit/fd_transceiver_simple/sub20/
    make
    
  • Check the connection to the SUB-20 device using command lbusb. You should see a XDIMAX devices connected to the USB hub.
  • Program and configure the RF canceller with the desired values:
    cd ~/flexicon_orbit/fd_transceiver_simple/sub20/
    ./rf_canc_gen1_config PS-CODE ATT-CODE C1-CODE C2-CODE C3-CODE
    
    In particular, the PS-CODE=0,1,2,...,255 and ATT-CODE=0,1,2,...,127 codes are for configuring the 8-bit phase shifter and the 7-bit attenuator of the Gen-1 RF canceller, respectively. It is recommended to use C1-CODE=16, C2-CODE=6, C3-CODE=6, which provides 20dB isolation from the antenna-circulator interface. You can play with the values of ATT and PS until you see good cancellation profile (e.g., low residual self-interference power level) in Terminal 1.
  • An example temrinal output is below:
    root@node11-10:~/flexicon_orbit/fd_transceiver_simple/sub20# ./rf_canc_gen1_config 110 30 16 6 6
    Started...
    Sub20 device found... Serial Number is 48AB
    Device Opened!
    ...Finished programming DAC with value 110!
    ...Finished programming ATT with value 30!
    ...Finished programming CAP1 with value 16!
    ...Finished programming CAP2 with value 6!
    ...Finished programming CAP3 with value 6!
    

A Secondary Transmitter Using Node13-8

Once the full-duplex node11-10 is up and running, you can turn on another SDR to transmit to the full-duplex node. Below, we use node13-8 as an example in the 3rd terminal window (Terminal 3).

  • Load image, power on, and login into node13-8:
    omf tell -a offh -t node13-8
    omf load -i baseline-sdr.ndz -t node13-8
    omf tell -a on -t node13-8
    ssh root@node13-8
    
  • Configure the USRP Ethernet interface: ifconfig eth2 192.168.10.1 netmask 255.255.255.0 up
  • Set up a secondary transmitter sending a sine wave at a different frequency (e.g., 200 kHz) than that of the full-duplex node:
    ./tx_waveforms --args="serial=F331D4" --rate 1e6 --freq 900e6 gain 10 --wave-type SINE --wave-freq 200e3
    
    Now by analyzing the RX baseband data at node11-10, you will observe the received tone at 200kHz while the self-interence tone at 100kHz is cancelled to the USRP noise floor, which is around -90dBm.

Acknowledgements

This work was supported in part by NSF grant ECCS-1547406, DARPA RF-FPGA program, DARPA SPAR program, a Qualcomm Innovation Fellowship, a National Instruments Academic Research Grant, Texas Instruments, and Intel. We thank Steven Alfano, Jelena Diakonikolas, Aishwarya Rajen, Jinhui Song, Mingyan Yu for their contributions to various aspects of the project. We thank Ivan Seskar, Jakub Kolodziejski, and Prasanthi Maddala from WINLAB, Rutgers University, for their help on the integration with the ORBIT testbed. We also thank Kira Theuer and Kendall Ruiz from NI and the NI technical support team for their help.

Attachments (22)

Note: See TracWiki for help on using the wiki.