Changes between Version 10 and Version 11 of Tutorials/Wireless/GNURadioOFDM


Ignore:
Timestamp:
Oct 4, 2023, 5:33:54 PM (14 months ago)
Author:
prasanthi
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Tutorials/Wireless/GNURadioOFDM

    v10 v11  
    4242
    4343==== Find the USRPs ====
    44 1. As mentioned in the [https://orbit-lab.org/wiki/Hardware/bDomains/cSandboxes/bSB2 sb2.orbit] page, the X310s have their port 1 directly connected to their respective nodes, and the IP addresses hardcoded to 192.168.40.2 as given in the [https://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_setup_network X310 manual]. To access the X310s run eth_config_sb2_orbit.sh on both the nodes. It sets a static IP address 192.168.40.1 on eno2 interface, and modifies the maximum send and receive socket buffer sizes.
     441. As mentioned in the [https://orbit-lab.org/wiki/Hardware/bDomains/cSandboxes/bSB2 sb2.orbit] page, the X310s have their port 1 directly connected to their respective nodes, and the IP addresses hardcoded to 192.168.40.2 as given in the [https://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_setup_network X310 manual]. To access the X310s run eth_config_sb2_orbit.sh on both the nodes. It sets a static IP address 192.168.40.1 on the DATA2 interface, and modifies the maximum send and receive socket buffer sizes.
    4545{{{#!shell
    4646root@node1-2:~# ./eth_config_sb2_orbit.sh