Changes between Version 8 and Version 9 of Tutorials/Wireless/GNURadioOFDM

Timestamp:

Oct 4, 2023, 4:43:27 AM (14 months ago)

Author:

prasanthi

Comment:

—

Tutorials/Wireless/GNURadioOFDM

@@ -17 +17 @@
 === Tutorial Setup ===
 
-Follow the steps below to gain access to the [wiki:/hardware/Domains/sb1 sandbox 1 console] and set up nodes with appropriate images. 
+Follow the steps below to gain access to the [https://orbit-lab.org/wiki/Hardware/bDomains/cSandboxes/bSB2 sandbox 2 console] and set up nodes with appropriate images. 
  1. If you don't have one already, sign up for a [https://www.cosmos-lab.org/portal-2/ COSMOS account]
- 1. [wiki:/GettingStarted#MakeaReservation Create a resource reservation] on sandbox 1
- 1. [wiki:/GettingStarted#LogintoyourReservation Login] into sandbox 1 console (console.sb1.cosmos-lab.org) with an SSH session. SSH session for COSMOS SB1 with MobaXterm can be setup as shown, with remote host = console.sb1.cosmos-lab.org, and username = your COSMOS username. X11 forwarding is enabled to access GUI.
-[[Image(mobaxterm_sb1_session.JPG, width=600px)]]
- 1. Make sure all the nodes and devices used in the experiment are turned off:
-{{{#!shell
-omf tell -a offh -t system:topo:all  
-}}}
+ 1. [wiki:/GettingStarted#MakeaReservation Create a resource reservation] on sandbox 2 (ORBIT)
+ 1. [wiki:/GettingStarted#LogintoyourReservation Login] into sandbox 2 console (console.sb2.cosmos-lab.org) with an SSH session. SSH session for ORBIT SB2 with MobaXterm can be setup as shown in the [https://wiki.cosmos-lab.org/wiki/Tutorials/Wireless/Fosphor#ConfigureMobaXtermfornodeaccess Fosphor tutorial], with remote host = console.sb2.orbit-lab.org, and username = your COSMOS username. X11 forwarding is enabled to access GUI.
  1. Load gnuradio_ofdm.ndz on both the nodes 
 {{{#!shell
@@ -125 +120 @@
 
 ==== Run the GRC application ====
-*Open OFDM receiver on node1-2
+* Open OFDM receiver on node1-2
 
 {{{#!shell