Changes between Version 15 and Version 16 of Tutorials/Wireless/mmwave80211adORCA

Timestamp:

Mar 23, 2020, 3:13:15 PM (5 years ago)

Author:

prasanthi

Comment:

—

Tutorials/Wireless/mmwave80211adORCA

@@ -108 +108 @@
 
 === Prepare Sivers 60GHz front-ends ===
-* To demonstrate the experiment here, we use Sivers front-end SN0243 as transmitter and SN0240 as receiver
-*
-||  SN0243 as transmitter                    ||  SN0240 as receiver                       ||
-||  root@srv3-lg1:~/ederenv# ./start_mb1.sh  --gui SN0243 || root@srv4-lg1:~/ederenv# ./start_mb1.sh  --gui SN0240 ||
+* To demonstrate the experiment here, we use Sivers front-end SN0240 as transmitter and SN0243 as receiver
+
+||  SN0240 as transmitter                    ||  SN0243 as receiver                       ||
+||  root@srv4-lg1:~/ederenv# ./start_mb1.sh  --gui SN0240 || root@srv3-lg1:~/ederenv# ./start_mb1.sh  --gui SN0243 ||
 ||  Click "TX enable" and "LO leakage Cal"   || Click "RX enable"                         || 
-||  [[Image(Sivers_TX_GUI.jpg, 500px)]]      ||  [[Image(Sivers_RX_GUI.jpg, 500px)]]      ||
+||  [[Image(Sivers_TX_SN0240.jpg, 500px)]]      ||  [[Image(Sivers_RX_SN0243.jpg, 500px)]]      ||
 
 === Run the experiment ===