Changes between Version 25 and Version 26 of Tutorials/Wireless/mmwave80211adORCA


Ignore:
Timestamp:
Mar 26, 2020, 9:57:54 PM (4 years ago)
Author:
prasanthi
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Tutorials/Wireless/mmwave80211adORCA

    v25 v26  
    77Setup for the experiment is shown in the figure above. In the benchtop 60GHz setup of SandBox1, either USRP X310 or RFSoC can be used for baseband processing. RF Switches as shown in the figure are used to select between X310 and RFSoC. RF Control commands are explained [here]. To select X310s, all the switches in the RF switch boxes are configured to port 1.
    88
    9 This experiment uses USRP X310s for baseband processing. Host GNURadio applications on srv3, srv4, send/receive data samples to/from the X310s over 10G Ethernet links. Sivers control software on srv3, srv4 talk to the mmWave front-ends over USB links.
     9This experiment uses USRP X310s for baseband processing. Host GNURadio applications on srv3, srv4, send/receive data samples to/from the X310s over 10G Ethernet links. Sivers control software on srv3, srv4 talk to the mmWave front-ends over USB links. 802.11ad single carrier frames at reduced bandwidth (200MHz) are transmitted over 60GHz mmWave link, and channel impulse response is computed on the receive end.
    1010
    1111=== Prerequisites ===