Changes between Version 38 and Version 39 of Tutorials/Wireless/mmwave80211adORCA

Timestamp:

Sep 22, 2020, 1:20:24 PM (4 years ago)

Author:

prasanthi

Comment:

—

Tutorials/Wireless/mmwave80211adORCA

@@ -48 +48 @@
 * The IP addresses for Ethernet Port 1(10G) on the X310s rfdev3-1 and rfdev3-2 were hard-coded to 10.115.6.1 and 10.115.6.2 respectively. To access them from srv3-lg1 or srv4-lg1, configure the network interface enp1s0 as follows
 {{{#!shell-session
-root@srv3-lg1:~# ifconfig enp1s0 10.115.1.3 netmask 255.255.0.0 mtu 9000 up
-root@srv3-lg1:~# ifconfig enp1s0
-enp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 9000
-        inet 10.115.1.3  netmask 255.255.0.0  broadcast 10.115.255.255
-        inet6 fe80::f652:14ff:fe83:b930  prefixlen 64  scopeid 0x20<link>
-        ether f4:52:14:83:b9:30  txqueuelen 1000  (Ethernet)
-        RX packets 2839670  bytes 20838442698 (20.8 GB)
-        RX errors 0  dropped 0  overruns 0  frame 0
-        TX packets 78864  bytes 6661472 (6.6 MB)
-        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
+root@srv3-lg1:~# ip link set enp1s0 mtu 9000 up
+root@srv3-lg1:~# ip addr add 10.115.1.3/16 dev enp1s0
+root@srv3-lg1:~# ip addr show dev enp1s0
+4: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq state UP group default qlen 1000
+    link/ether f4:52:14:83:b9:30 brd ff:ff:ff:ff:ff:ff
+    inet 10.115.1.3/16 brd 10.115.255.255 scope global enp1s0
+       valid_lft forever preferred_lft forever
+    inet6 fe80::f652:14ff:fe83:b930/64 scope link
+       valid_lft forever preferred_lft forever
 }}}