Changes between Version 29 and Version 30 of Tutorials/Wireless/mmwave Paam Basics

Timestamp:

Mar 3, 2022, 7:34:45 PM (4 years ago)

Author:

prasanthi

Comment:

—

Tutorials/Wireless/mmwave Paam Basics

@@ -139 +139 @@
 ==== Configure IBM 28GHz PAAM ====
 COSMOS uses a RESTful [https://wiki.cosmos-lab.org/wiki/Resources/Services/ArrayMgmt service for IBM PAAM management]
+The service can be used for
+* Dynamic array management - where the user connects to the antenna using {{{connect}}} command, dynamically steers the antenna during the experiment using {{{steer}}} command, and disconnects once the experiment is done.
+* Static array management - where the user can connect, steer and disconnect using a single command, {{{configure}}}
+* Details and examples for the above are provided at the [https://wiki.cosmos-lab.org/wiki/Resources/Services/ArrayMgmt array management page].
+* For this experiment we use static array management commands
+{{{#!td
+SB1
+   {{{
+   }}}
+}}}
+{{{#!td
+SB2
+   {{{
+   }}}
+}}}
+
+
+
 
 ==== Run the experiment ====