Changes between Version 5 and Version 6 of Tutorials/Wireless/mmwaveRFSoC


Ignore:
Timestamp:
May 20, 2020, 5:56:38 AM (4 years ago)
Author:
skrimpon
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Tutorials/Wireless/mmwaveRFSoC

    v5 v6  
    1010|| [[Image(MISO_tutorial.jpg, 900px)]] ||
    1111
    12 In the benchtop 60GHz setup of SandBox1, either USRP X310 or RFSoC ZCU111 can be used for baseband processing. RF Switch boxes as shown in the figure are used to select between X310 and RFSoC. RF switch commands are explained at wiki:/Resources/Services/RFSwitch. To select X310s as baseband processing units, all the switches in the RF switch boxes are configured to port 1.
     12In the benchtop 60GHz setup of SandBox1, either USRP X310 or RFSoC ZCU111 can be used for baseband processing. RF Switch boxes as shown in the figure are used to select between X310 and RFSoC. RF switch commands are explained at wiki:/Resources/Services/RFSwitch. To select ZCU111 as baseband processing units, all the switches in the RF switch boxes are configured to port 2.
    1313
    1414This experiment uses the Xilinx ZynqMP Ultrascale+ RFSoC ZCU111 board for the baseband processing. Sivers control software on srv3, srv4 talk to the mmWave front-ends over USB links. Host GNURadio applications on srv3, srv4, send/receive data samples to/from the RFSoC over 1G Ethernet link.