Changes between Version 17 and Version 18 of Tutorials/Wireless/mmwaveSB1

Timestamp:

Jan 8, 2020, 8:35:17 PM (5 years ago)

Author:

prasanthi

Comment:

—

Tutorials/Wireless/mmwaveSB1

@@ -126 +126 @@
 * To demonstrate the experiment here, we use Sivers front-end SN0243 as transmitter and SN0240 as receiver
 
-* Configure SN0243 as transmitter
+* Configure SN0243 as transmitter using "TX enable" on the GUI
 {{{
-root@srv3-lg1:~/ederenv# ./start_mb1.sh  SN0243
-  Command history file: eder.cmd
-    Trying to import module ederftdi
-  Connecting to device with unit name SN0243 connected to motherboard MB1.
-  Using settings for Eder Gen 2
-  Device init OK
-  Requested vcm value: 600mV
-  setting value: 749
-  VCM set to 600mV
-  Chip present (chip_id = 0x02711702).
->>> eder.tx_enable()
-  TX enabled
+root@srv3-lg1:~/ederenv# ./start_mb1.sh  --gui SN0243
+}}}
+|| [[Image(mmWave_TX_GUI.jpg, 500px)]] ||
 
-}}}
-
-*  Configure SN0240 as receiver by running the control software on srv4-lg1
+*  Configure SN0240 as receiver using "RX enable" on the GUI on srv4-lg1
 {{{
 root@srv4-lg1:~/ederenv# ./start_mb1.sh  SN0240
-  Command history file: eder.cmd
-    Trying to import module ederftdi
-  Connecting to device with unit name SN0240 connected to motherboard MB1.
-  Using settings for Eder Gen 2
-  Device init OK
-  Requested vcm value: 600mV
-  setting value: 749
-  VCM set to 600mV
-  Chip present (chip_id = 0x02711702).
->>> eder.rx_enable()
-  RX enabled
->>>
-
 }}}
+|| [[Image(mmWave_RX_GUI.jpg, 500px)]] ||
 
 ==== Run the experiment ====