Changes between Version 20 and Version 21 of Tutorials/Wireless/mmwaveSB1

Timestamp:

Jan 8, 2020, 8:39:36 PM (5 years ago)

Author:

prasanthi

Comment:

—

Tutorials/Wireless/mmwaveSB1

@@ -33 +33 @@
   prasanthi@console:~$ omf load -i sivers_sb1_cosmos.ndz -t srv1-lg1,srv2-lg1
   }}} 
-
   {{{
   prasanthi@console:~$ omf load -i baseline_sdr_1804.ndz -t srv1-lg1,srv2-lg1
@@ -130 +129 @@
 root@srv3-lg1:~/ederenv# ./start_mb1.sh  --gui SN0243
 }}}
-|| [[Image(Sivers_TX_GUI.jpg, 500px)]] ||
+  || [[Image(Sivers_TX_GUI.jpg, 500px)]] ||
 
 *  Configure SN0240 as receiver using "RX enable" on the GUI on srv4-lg1
@@ -136 +135 @@
 root@srv4-lg1:~/ederenv# ./start_mb1.sh  SN0240
 }}}
-|| [[Image(Sivers_RX_GUI.jpg, 500px)]] ||
+  || [[Image(Sivers_RX_GUI.jpg, 500px)]] ||
 
 ==== Run the experiment ====
@@ -147 +146 @@
 {{{
 root@srv2-lg1:~# /usr/lib/uhd/examples/rx_ascii_art_dft --args="addr=10.115.2.3" --freq 100e6 --rate 200e6 --ref-lvl -20 --ant AB --subdev B:AB  
-}}}
-  
+}}}  
   || [[Image(mmWave_sinewave_rx.jpg, 700px)]] ||