Changes between Version 46 and Version 47 of Tutorials/Wireless/mmwaveSB1


Ignore:
Timestamp:
Sep 22, 2020, 1:26:35 PM (4 years ago)
Author:
prasanthi
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Tutorials/Wireless/mmwaveSB1

    v46 v47  
    5151* The IP addresses for Ethernet Port 1(10G) on the X310s rfdev3-1 and rfdev3-2 were hard-coded to 10.115.6.1 and 10.115.6.2 respectively. To access them from srv3-lg1 or srv4-lg1, configure the network interface enp1s0 as follows
    5252{{{#!shell-session
    53 root@srv3-lg1:~# ifconfig enp1s0 10.115.1.1 netmask 255.255.0.0 mtu 9000 up
    54 root@srv3-lg1:~# ifconfig enp1s0
    55 enp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 9000
    56         inet 10.115.1.1  netmask 255.255.0.0  broadcast 10.115.255.255
    57         inet6 fe80::f652:14ff:fe83:b930  prefixlen 64  scopeid 0x20<link>
    58         ether f4:52:14:83:b9:30  txqueuelen 1000  (Ethernet)
    59         RX packets 2839670  bytes 20838442698 (20.8 GB)
    60         RX errors 0  dropped 0  overruns 0  frame 0
    61         TX packets 78864  bytes 6661472 (6.6 MB)
    62         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
     53root@srv3-lg1:~# ip addr show dev enp1s0
     544: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq state UP group default qlen 1000
     55    link/ether f4:52:14:83:b9:30 brd ff:ff:ff:ff:ff:ff
     56    inet 10.115.1.3/16 brd 10.115.255.255 scope global enp1s0
     57       valid_lft forever preferred_lft forever
     58    inet6 fe80::f652:14ff:fe83:b930/64 scope link
     59       valid_lft forever preferred_lft forever
     60
    6361}}}
    6462