Changes between Version 53 and Version 54 of Tutorials/Wireless/mmwaveSB1

Timestamp:

Aug 6, 2021, 4:31:59 PM (4 years ago)

Author:

prasanthi

Comment:

—

Tutorials/Wireless/mmwaveSB1

@@ -15 +15 @@
 || [[Image(sb1_benchtop_mmwave.jpg, 900px)]] ||
 
-In the benchtop 60GHz setup of SandBox1, either USRP N310 or RFSoC ZCU111 can be used for baseband processing. RF Switch boxes as shown in the figure are used to select between N310 and RFSoC. RF switch commands are explained at wiki:/Resources/Services/RFSwitch. To select N310s as baseband processing units, all the switches in the RF switch boxes are configured to port 1.
+In the benchtop 60GHz setup of SandBox1, either USRP N310 or RFSoC ZCU111 can be used for baseband processing. RF Switch boxes as shown in the figure are used to select between N310 and RFSoC. RF path configuration details are at https://wiki.cosmos-lab.org/wiki/Architecture/Domains/cosmos_sb1#RFPathConfigurationsformmWaveDevelopmentPlatforms, and RF switch commands are explained at wiki:/Resources/Services/RFSwitch. To select N310s as baseband processing units, all the switches in the RF switch boxes are configured to port 1.
 
 This experiment uses USRP N310s for baseband processing.  
 
-Sivers control software on srv1-in1, srv1-in2 talk to the mmWave front-ends over USB links. Host GNURadio applications on srv1-in1, srv1-in2, send/receive data samples to/from the X310s over 10G Ethernet links. 
+Sivers control software on srv1-in1, srv1-in2 talks to the mmWave front-ends over USB links. Host GNURadio applications on srv1-in1, srv1-in2, send/receive data samples to/from the N310s over 10G Ethernet links. 
  
 === Prerequisites ===
@@ -25 +25 @@
 
 === Resources required ===
-2 servers srv1-in1, srv1-in2, 2 USRP N310s sdr1-in1, sdr1-in2 and both the Sivers platforms rfdev3-5, rfdev3-6 on COSMOS SB1.
+2 servers srv1-in1, srv1-in2, 2 USRP N310s sdr1-in1, sdr1-in2 and both the Sivers mmWave platforms rfdev3-in1, rfdev3-in2 on COSMOS SB1.
 === Tutorial Setup ===