wiki:Architecture/Domains/cosmos_sb2

Version 11 (modified by tingjunchen, 3 years ago) ( diff )

Sandbox 2 (sb2.cosmos-lab.org)

COSMOS sandbox 2, located at Columbia University in New York City, NY, is designed as a mini version representative of the current and future capabilities of the larger outdoor deployment in New York City. It is meant primarily to be a development and testing environment for researchers to become familiar with the software and hardware architectures available in COSMOS.

Sandbox 2 Block Diagram
Block diagram of COSMOS sandbox 2

The experimentation focus of this sandbox is (in addtition to standrad sub-6 GHz SDR) on full-duplex and mmWave (28 GHz).

IP Address Assignment

Device Control Network Data Network 1 Data Network 2
Core Servers
Server 1 10.116.1.1 (srv1-lg1) 10.117.1.1 (srv1a-lg1) 10.118.1.1 (srv1b-lg1)
Server 2 10.116.1.2 (srv2-lg1) 10.117.1.2 (srv2a-lg1) 10.118.1.2 (srv2b-lg1)
Large Node
USRP N310 (S1) 10.116.2.1 (sdr1-s1-lg1) 10.117.2.1 (sdr1a-s1-lg1) 10.118.2.1 (sdr1b-s1-lg1)
USRP 2974 (S1) 10.116.2.2 (sdr2-s1-lg1) 10.117.2.2 (sdr2a-s1-lg1) 10.118.2.2 (sdr2b-s1-lg1)
Medium Node
USRP N310 10.116.3.1 (sdr1-md1) 10.117.3.1 (sdr1a-md1) 10.118.3.1 (sdr1b-md1)
USRP 2974 10.116.3.2 (sdr2-md1) 10.117.3.2 (sdr2a-md1) 10.118.3.2 (sdr2b-md1)
RFSoC ZCU111
RFSoC #1 10.116.4.1 (rfdev1-1) N/A N/A
RFSoC #2 10.116.4.2 (rfdev1-2) N/A N/A
IBM PAAMs
PAAM #1 10.116.5.1 (rfdev2-1) N/A N/A
PAAM #2 10.116.5.2 (rfdev2-2) N/A N/A

Current RF Frontend COnfiguration (November 2019)

Due to it's indoor deployment and its designated use being for development of future COSMOS capabilities, SB2 does not have the same RF frontend as the main testbed (ie. no amplification or filtering). Instead, only a set of RF switches is connected to most of the SDR's ports to give the experimenter the ability to connect to different future RF frontends or devices.

Block diagram of a pair of SDRs (sdr1, sdr2) and their respective RF switch connections

The configuration of the RF switches can be controlled via the rf_switch service's HTTP API. Use the following table as a reference for service parameters.

RF Switch NameSB2 nodes it is connected to
rfsw-s1-lg1.sb2.cosmos-lab.org sdr1-s1-lg1
sdr2-s1-lg1
rfsw-md1.sb2.cosmos-lab.org sdr1-md1
sdr2-md1

Attachments (2)

Download all attachments as: .zip

Note: See TracWiki for help on using the wiki.