wiki:Tutorials/4G5G/weekshall

Version 11 (modified by prasanthi, 2 years ago) ( diff )

—

Site Navigation

  1. COSMOS Testbed Overview
    1. Concepts
    1. Testbed Workflow
    1. Availability and Resource Status
    1. Events and Conferences
  6. Getting Started
    1. Make an Account
    2. Create and Configure SSH Keys
    3. Make a Reservation
    4. Log in to your Reservation
    5. Control Resources with OMF
    6. Run a Hello World Experiment
    7. Get Help and Support
  7. User Guide
    1. Policies
    1. Account Creation
    1. Scheduling and Reservations
    1. Disk Images
    1. Frequently Asked Questions
    1. Resource Control with OMF
    1. Remote Access
    1. Chrome Remote Desktop Setup Page
    1. Measurement & Result Collection
    1. Storage
    1. Support
    1. Contributing to the Wiki
  20. Tutorials
    1. SDR and Wireless
    2. Optical Networking
    3. Wired Networking
    4. Edge Computing
    5. 4G/5G Systems
    6. Orchestration Platforms
  21. Architecture
    1. Data Flow
    1. Deployment Map
    1. Domains
    1. Naming Convention
    1. Networks
    1. Optical
  28. Resources, Services and APIs
    1. RF Control
    2. SDR Control
    3. Compute Control
    4. Network Control
    5. Optical Control
  29. Datasets
  30. Hardware Info
    1. Cameras
    1. Compute
    1. Network
    1. Nodes
    1. Optical
    1. RF Subsystems
    1. Antennas
    1. Full-Duplex Radio
    1. RF Front End
    1. Software Defined Radios (SDR)
  41. RF Policies & Compliance
    1. Outdoor Radio Frequency Allocation
    2. Program Experiment License
    3. Spectrum Monitoring
    4. Emergency Stop Procedures
    5. Network and Platform Security

Amarisoft 4G/5G System in weeks.cosmos

Description

This tutorial contains instructions for setting up a 4G/5G network in weeks.cosmos domain. Amarisoft software based eNb/gNb, MME run on the USRP-2974

Prerequisites

In order to access the test bed, create a reservation and have it approved by the reservation service. Access to the resources is granted after the reservation is confirmed. Please follow the process shown on the COSMOS getting started page to get started.

Resources required

1 USRP-2974, 1 COSMOS node with SIM8200 modem. in ​COSMOS Weeks hall domain

Tutorial Setup

Follow the steps below to gain access to the Weeks hall console and set up nodes with appropriate images.

  1. If you don't have one already, sign up for a ​COSMOS account
  2. Create a resource reservation on sandbox 1
  3. Login into sandbox 1 console (console.sb1.cosmos-lab.org) with two SSH sessions.
  4. Make sure all the resources in the domain are turned off: 
    omf tell -a offh -t system:topo:allres
    For this tutorial we will be using a USRP-2974 sdr2-s1-lg1 and a COSMOS node srv1-in1. srv1-in1 has a ​Waveshare SIM8200 modem attached over USB.
  5. Load amarisoft-2974.ndz on sdr2-s1-lg1 
    omf load -i amarisoft-2974.ndz -t sdr2-s1-lg1

    omf load -i waveshare-sim8200.ndz -t srv1-in1
  6. Turn all the required resources on and check the status 
    omf tell -a on -t srv1-in1,sdr2-s1-lg1

    omf stat -t system:topo:allres
  7. ssh to the nodes, use option -Y for using GUI.

Tutorial Execution

Run the Amarisoft base station

  • Upon logging into sdr2-s1-lg1, run uhd_find_devices to check the USRP. 
    root@sdr2-s1-lg1:~# uhd_find_devices --args="resource=RIO0"
[INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501; UHD_3.15.0.0-release
--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
    serial: 318F215
    fpga: XG
    name:
    product: X310
    resource: RIO0
    type: x300
  • Run the MME 
    root@sdr2-s1-lg1:~# cd /opt/amarisoft/ltemme-linux-2021-09-18
root@sdr2-s1-lg1:/opt/amarisoft/ltemme-linux-2021-09-18# ./ltemme config/mme.cfg
Core version 2021-09-18, Copyright (C) 2012-2021 Amarisoft
This software is licensed to Rutgers University (The State University of New Jersey).
License server: license.orbit-lab.org (0b-b4-46-dc-2f-83-58-cb)
Support and software update available until 2022-08-18.

(mme)
  • Run the eNodeb in another ssh session. 
    root@sdr2-s1-lg1:~# cd /opt/amarisoft/lteenb-linux-2021-09-18
root@sdr2-s1-lg1:/opt/amarisoft/lteenb-linux-2021-09-18# ./lteenb config/enb-2974.cfg
Base Station version 2021-09-18, Copyright (C) 2012-2021 Amarisoft
This software is licensed to Rutgers University (The State University of New Jersey).
License server: license.orbit-lab.org (0b-b4-46-dc-2f-83-58-cb)
Support and software update available until 2021-12-02.

[INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501; UHD_3.15.0.0-release
[INFO] [MPMD FIND] Found MPM devices, but none are reachable for a UHD session. Specify find_all to find all devices.
[INFO] [X300] X300 initialization sequence...
[INFO] [X300] Connecting to niusrpriorpc at localhost:5444...
[INFO] [X300] Using LVBITX bitfile /usr/share/uhd/images/usrp_x310_fpga_XG.lvbitx
[INFO] [X300] Radio 1x clock: 184.32 MHz
[INFO] [GPS] Found an internal GPSDO: LC_XO, Firmware Rev 0.929b
[INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D00000000000)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1312 MB/s)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1318 MB/s)
[INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0000000000000)
[INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0000000000000)
RF0: sample_rate=11.520 MHz dl_freq=2140.000 MHz ul_freq=1950.000 MHz (band 1) dl_ant=1 ul_ant=1
(enb) WARNING: The GPS is not locked. If you need time synchronization, you should restart the program when the GPS is locked.
Chan Gain(dB)   Freq(MHz)
 TX1     30.0 2140.000000
 RX1     30.0 1950.000000

(enb) t
Press [return] to stop the trace

SIM8200 UE

  • As the base station runs,SIM8200 modem on srv1-in1 communicates with the base station and registers to the network. You can see eNodeb trace similar to the one below. 
    (enb) t
Press [return] to stop the trace
PRACH: cell=01 seq=20 ta=11 snr=16.0 dB
               ----DL----------------------- --UL------------------------------------------------
UE_ID  CL RNTI C cqi ri  mcs retx txok brate  snr puc1  mcs rxko rxok brate     #its phr  pl   ta
    1 001 003d 1   7  1  6.8    0    5   708 16.1 -1.0 10.0   12    7 2.55k  1/4.5/6   0  24 -0.3
    1 001 003d 1   9  1 13.8    1   23 6.46k 11.7  2.9 17.2   19   21 18.7k  1/4.1/6   5  24 -0.2
    1 001 003d 1   7  1 15.4    0    5   960 11.4 14.7  9.0    0    1   628  1/1.0/1   2  25 -0.4
    1 001 003d 1   7  1 11.0    0    4   312  7.2 -8.9 16.0    0    1   612  2/2.0/2   5  24 -0.1
    1 001 003d 1   7  1 11.8    0    4   336  9.2 11.4    -    0    0     0        -   5  24 -1.0
    1 001 003d 1   5  1 11.8    0    4   336 12.5 18.2 11.0    0    1   516  1/1.0/1   3  24 -0.4
    1 001 003d 1   8  1 11.8    0    4   372  4.3 16.8    -    0    0     0        -   3  24 -0.4
  • In the MME session you can check the eNodeb and registered ue. The modem has a SIM card with IMSI 310014000000017 as shown in the MME log below. IP address 192.168.2.2 has been allocated to the modem. 
    (mme) enb
  PLMN    eNB_ID                        IP:Port #UEctx   TACs
310014   0x1a2d0                127.0.1.1:47633      0    0x1
(mme) ue
            SUPI           IMEISV  CN M-TMSI/5G-TMSI REG           TAC #BEARER IP_ADDR
 310014000000017 8642840402500300 EPC     0xa592c726   Y 310014.   0x1       2 192.168.2.2 192.168.4.2 2001:468:3000:1::
(mme)
  • On srv1-in1, you can see that the modem shows up as a wwan interface wwp0s20u3i5. 
    root@srv1-in1:~# ifconfig -a
CTRL: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.44.1.5  netmask 255.255.0.0  broadcast 10.44.255.255
        inet6 fe80::da50:e6ff:fed4:f80e  prefixlen 64  scopeid 0x20<link>
        ether d8:50:e6:d4:f8:0e  txqueuelen 1000  (Ethernet)
        RX packets 53  bytes 7687 (7.6 KB)
        RX errors 0  dropped 7  overruns 0  frame 0
        TX packets 39  bytes 5910 (5.9 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 20  memory 0xf7d00000-f7d20000

DATA1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::da50:e6ff:fed4:f60a  prefixlen 64  scopeid 0x20<link>
        ether d8:50:e6:d4:f6:0a  txqueuelen 1000  (Ethernet)
        RX packets 5  bytes 300 (300.0 B)
        RX errors 0  dropped 5  overruns 0  frame 0
        TX packets 11  bytes 1874 (1.8 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 148  bytes 10311 (10.3 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 148  bytes 10311 (10.3 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wwp0s20u3i5: flags=4291<UP,BROADCAST,RUNNING,NOARP,MULTICAST>  mtu 1500
        inet6 fe80::7cab:29ff:fe84:1b18  prefixlen 64  scopeid 0x20<link>
        ether 7e:ab:29:84:1b:18  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
  • Set the IP address of the wwan interface to the once allocated by the MME (192.168.2.2 in this case) 
    root@srv1-in1:~# ifconfig wwp0s20u3i5 192.168.2.2

Test

  • You can now communicate with the base station over the air. The data connection can be tested with ping or iperf as below. 
    root@srv1-in1:~# ifconfig wwp0s20u3i5 192.168.2.2
root@srv1-in1:~# ping 192.168.2.1
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
64 bytes from 192.168.2.1: icmp_seq=1 ttl=64 time=146 ms
64 bytes from 192.168.2.1: icmp_seq=2 ttl=64 time=25.0 ms
64 bytes from 192.168.2.1: icmp_seq=3 ttl=64 time=23.9 ms
64 bytes from 192.168.2.1: icmp_seq=4 ttl=64 time=21.9 ms
64 bytes from 192.168.2.1: icmp_seq=5 ttl=64 time=39.9 ms
64 bytes from 192.168.2.1: icmp_seq=6 ttl=64 time=37.9 ms
64 bytes from 192.168.2.1: icmp_seq=7 ttl=64 time=35.9 ms
^C
--- 192.168.2.1 ping statistics ---
7 packets transmitted, 7 received, 0% packet loss, time 6010ms
rtt min/avg/max/mdev = 21.920/47.296/146.430/41.032 ms
  • iperf testing 
    root@sdr2-s1-lg1:~# iperf3 -s -i 1
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------


root@srv1-in1:~# iperf3 -c 192.168.2.1 -b 10M -i 1 -t 60
Connecting to host 192.168.2.1, port 5201
[  4] local 192.168.2.2 port 34278 connected to 192.168.2.1 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-1.00   sec   451 KBytes  3.70 Mbits/sec    0   45.2 KBytes
[  4]   1.00-2.00   sec   469 KBytes  3.85 Mbits/sec    0   63.6 KBytes
[  4]   2.00-3.00   sec   708 KBytes  5.80 Mbits/sec    0   84.8 KBytes
[  4]   3.00-4.00   sec   635 KBytes  5.20 Mbits/sec    0    109 KBytes
[  4]   4.00-5.00   sec   638 KBytes  5.22 Mbits/sec    0    129 KBytes
[  4]   5.00-6.00   sec   798 KBytes  6.53 Mbits/sec    0    158 KBytes
[  4]   6.00-7.00   sec   667 KBytes  5.47 Mbits/sec    0    198 KBytes
[  4]   7.00-8.00   sec   643 KBytes  5.27 Mbits/sec    0    260 KBytes
[  4]   8.00-9.00   sec   590 KBytes  4.83 Mbits/sec    0    315 KBytes
[  4]   9.00-10.00  sec   761 KBytes  6.23 Mbits/sec    0    427 KBytes
[  4]  10.00-11.00  sec   908 KBytes  7.44 Mbits/sec    0    581 KBytes
[  4]  11.00-12.00  sec   718 KBytes  5.88 Mbits/sec    0    747 KBytes
[  4]  12.00-13.00  sec   520 KBytes  4.26 Mbits/sec    0    747 KBytes
[  4]  13.00-14.00  sec   693 KBytes  5.68 Mbits/sec    0    747 KBytes
[  4]  14.00-15.00  sec   577 KBytes  4.73 Mbits/sec    0    747 KBytes
Note: See TracWiki for help on using the wiki.