wiki:Tutorials/Wireless/introTutorial

Version 2 (modified by jennyshane, 2 years ago) ( diff )

—

Site Navigation

  1. COSMOS Testbed Overview
    1. Concepts
    1. Testbed Workflow
    1. Availability and Resource Status
    1. Events and Conferences
  6. Getting Started
    1. Make an Account
    2. Create and Configure SSH Keys
    3. Make a Reservation
    4. Log in to your Reservation
    5. Control Resources with OMF
    6. Run a Hello World Experiment
    7. Get Help and Support
  7. User Guide
    1. Policies
    1. Account Creation
    1. Scheduling and Reservations
    1. Disk Images
    1. Frequently Asked Questions
    1. Resource Control with OMF
    1. Remote Access
    1. Chrome Remote Desktop Setup Page
    1. Measurement & Result Collection
    1. Storage
    1. Support
    1. Contributing to the Wiki
  20. Tutorials
    1. SDR and Wireless
    2. Optical Networking
    3. Wired Networking
    4. Edge Computing
    5. 4G/5G Systems
    6. Orchestration Platforms
  21. Architecture
    1. Data Flow
    1. Deployment Map
    1. Domains
    1. Naming Convention
    1. Networks
    1. Optical
  28. Resources, Services and APIs
    1. RF Control
    2. SDR Control
    3. Compute Control
    4. Network Control
    5. Optical Control
  29. Datasets
  30. Hardware Info
    1. Cameras
    1. Compute
    1. Network
    1. Nodes
    1. Optical
    1. RF Subsystems
    1. Antennas
    1. Full-Duplex Radio
    1. RF Front End
    1. Software Defined Radios (SDR)
  41. RF Policies & Compliance
    1. Outdoor Radio Frequency Allocation
    2. Program Experiment License
    3. Spectrum Monitoring
    4. Emergency Stop Procedures
    5. Network and Platform Security

Getting Started with COSMOS SDR Resources

Description

In this tutorial we'll demonstrate how to run a basic wireless experiment using software defined radios in the COSMOS testbed. Two COSMOS nodes will be used: one to transmit a signal, and the other to receive it.

Prerequisites

All tutorials on the COSMOS wiki assume that you have already created a user account through ​the new user registration form.

In order to access the test bed, create a reservation on ​the online scheduler and have it approved by the reservation service. Access to the resources are granted after the reservation is confirmed. Please see the page describing the COSMOS work flow page for more information.

Resources required

For this example we used two USRP 2974 SDRs on sandbox 1. These SDRs have an onboard SOM with an i7 processor, which is the device you're loading the orbit image onto and connecting to over ssh. They also have an fpga connected to the four antennas. We won't have to worry about the specifics of the USRP for this tutorial.

Tutorial Setup

Follow the steps below to gain access to this console and set up your node with an appropriate image.

  1. Create a resource reservation for sandbox 1.
  2. Once reservation is approved, login into the console using ssh. Since you are using sandbox 1, you will ssh to 
    YOUR_USERNAME@console.sb1.cosmos-lab.org
  3. Use OMF commands to load the baseline-uhd.sdr image on your resources. 
    omf load -i baseline-uhd.ndz -t sdr2-s1-lg1,sdr2-md1
  4. Once the nodes are successfully imaged, turn them on and check the status 
    omf tell -a on -t sdr2-s1-lg1,sdr2-md1

    omf stat -t sdr2-s1-lg1,sdr2-md1
  5. After waiting for the nodes to power up and boot, you will be able to ssh to them from the console: 
    ssh root@sdr2-s1-lg1
    NOTE: for some nodes, such as the server machines, it can take several minutes for a node to finish the booting process. This is normal, and you'll have to wait until the nodes is fully booted before you can ssh to it.
  6. Once you have an ssh session on either machine, you can verify that it is

Attachments (7)

Download all attachments as: .zip

Note: See TracWiki for help on using the wiki.