wiki:Tutorials/Wireless/mmwavePaamAgora

Version 4 (modified by zhenzhou77, 17 months ago) ( diff )

—

Site Navigation

  1. COSMOS Testbed Overview
    1. Concepts
    1. Testbed Workflow
    1. Availability and Resource Status
    1. Events and Conferences
  6. Getting Started
    1. Make an Account
    2. Create and Configure SSH Keys
    3. Make a Reservation
    4. Log in to your Reservation
    5. Control Resources with OMF
    6. Run a Hello World Experiment
    7. Get Help and Support
  7. User Guide
    1. Policies
    1. Account Creation
    1. Scheduling and Reservations
    1. Disk Images
    1. Frequently Asked Questions
    1. Resource Control with OMF
    1. Remote Access
    1. Chrome Remote Desktop Setup Page
    1. Measurement & Result Collection
    1. Storage
    1. Support
    1. Contributing to the Wiki
  20. Tutorials
    1. SDR and Wireless
    2. Optical Networking
    3. Wired Networking
    4. Edge Computing
    5. 4G/5G Systems
    6. Orchestration Platforms
  21. Architecture
    1. Data Flow
    1. Deployment Map
    1. Domains
    1. Naming Convention
    1. Networks
    1. Optical
  28. Resources, Services and APIs
    1. RF Control
    2. SDR Control
    3. Compute Control
    4. Network Control
    5. Optical Control
  29. Datasets
  30. Hardware Info
    1. Cameras
    1. Compute
    1. Network
    1. Nodes
    1. Optical
    1. RF Subsystems
    1. Antennas
    1. Full-Duplex Radio
    1. RF Front End
    1. Software Defined Radios (SDR)
  41. RF Policies & Compliance
    1. Outdoor Radio Frequency Allocation
    2. Program Experiment License
    3. Spectrum Monitoring
    4. Emergency Stop Procedures
    5. Network and Platform Security

IBM 28GHz PAAM: Integration with USRPs with MIMO capability

Description

In this tutorial, we demonstrate the integration of IBM 28GHz PAAM boars with USRPs. We present the MIMO capability with real-time baseband processing using the system.

  • The instructions for the RENEW Platform Agora software can be found ​here under ​RENEW license.
  • The COSMOS team contributes to adding the UHD support for the Agora software under the ​UHD license. We thank the RENEW team for their support and help throughout the process.

Authors:
Zhenzhou (Tom) Qi, Duke University <zhenzhou.qi[at]duke[dot]edu>
Tingjun Chen, Duke University <tingjun.chen[at]duke[dot]edu>

Last updated: July 5, 2023

Prerequisites

In order to access COSMOS-SB2, create a reservation in COSMOS testbed and have it approved by the reservation service. Access to the resources is granted after the reservation is confirmed. Please follow the process shown on the COSMOS getting ​started page to get started.

Resources Required

  • 2 USRP N310 SDRs (sdr1-s1-lg1 and sdr1-md1 in SB2)
  • 2 IBM 28GHz PAAMs (rfdev2-1 and rfdev2-2 in SB2 )
  • 1 Server (srv1-lg1)

The current hardware connection in SB2 as shown below

  • sdr1-s1-lg1 RF2 TX/RX — rfdev2-1 all IC0/TX/H, sdr1-s1-lg1 RF2 RX2 — rfdev2-1 all IC1/RX/H
  • sdr1-s1-lg1 RF3 TX/RX — rfdev2-1 all IC0/TX/V, sdr1-s1-lg1 RF3 RX2 — rfdev2-1 all IC1/RX/V
  • sdr1-md1 RF2 TX/RX — rfdev2-2 all IC0/TX/H, sdr1-md1 RF2 RX2 — rfdev2-2 all IC1/RX/H
  • sdr1-md1 RF3 TX/RX — rfdev2-2 all IC0/TX/V, sdr1-md1 RF2 RX2 — rfdev2-2 all IC1/RX/V

Attachments (7)

Note: See TracWiki for help on using the wiki.