IBM 28GHz PAAM: Integration with USRPs with MIMO capability

Description

In this tutorial, we demonstrate the integration of IBM 28GHz PAAM boars with USRPs. We present the MIMO capability with real-time baseband processing using the system.

• The instructions for the RENEW Platform Agora software can be found ​here under ​RENEW license.
• The COSMOS team contributes to adding the UHD support for the Agora software under the ​UHD license. We thank the RENEW team for their support and help throughout the process.

Authors:
Zhenzhou (Tom) Qi, Duke University <zhenzhou.qi[at]duke[dot]edu>
Tingjun Chen, Duke University <tingjun.chen[at]duke[dot]edu>

Last updated: July 5, 2023

Prerequisites

In order to access COSMOS-SB2, create a reservation in COSMOS testbed and have it approved by the reservation service. Access to the resources is granted after the reservation is confirmed. Please follow the process shown on the COSMOS getting ​started page to get started.

Resources Required

• 2 USRP N310 SDRs (sdr1-s1-lg1 and sdr1-md1 in SB2)
• 2 IBM 28GHz PAAMs (rfdev2-1 and rfdev2-2 in SB2 )
• 1 Server (srv1-lg1)

The current hardware connection in SB2 as shown below

• sdr1-s1-lg1 RF2 TX/RX — rfdev2-1 IC0/TX/H, sdr1-s1-lg1 RF2 RX2 — rfdev2-1 IC1/RX/H
• sdr1-s1-lg1 RF3 TX/RX — rfdev2-1 IC0/TX/V, sdr1-s1-lg1 RF3 RX2 — rfdev2-1 IC1/RX/V
• sdr1-md1 RF2 TX/RX — rfdev2-2 IC0/TX/H, sdr1-md1 RF2 RX2 — rfdev2-2 IC1/RX/H
• sdr1-md1 RF3 TX/RX — rfdev2-2 IC0/TX/V, sdr1-md1 RF2 RX2 — rfdev2-2 IC1/RX/V

The required software components used in this demo are already loaded to the IBMPAAM-USRP-RT-Baseband.ndz node image, the node image includes:

• Ubuntu 20.04, UHD 4.1.0
• PAAM Control to initialize the PAAM boards to integrate with USRPs.
• Agora-UHD: An UHD-integrated real-time baseband processing pipeline. Please refer to Cubic23 branch at ​here for more information.
• Real-time visualization for the real-time DSP pipeline.

Tutorial Setup

Follow the steps below to gain access to the sandbox console and set up nodes with appropriate images.

1. If you don't have one already, sign up for a ​COSMOS account
2. Create a resource reservation on COSMOS SB2
3. Login into sandbox console console.sb2.cosmos-lab.org) with four SSH sessions.
4. In terminal 1, make sure all the nodes and devices used in the experiment are turned off. Use the following command for SB2

   omf tell -a offh -t sdr1-s1-lg1,sdr1-md1,rfdev2-1,rfdev2-2,srv1-lg1
   

5. Load IBMPAAM-USRP-RT-Baseband.ndz on the server.

   omf load -i IBMPAAM-USRP-RT-Baseband.ndz -t srv1-lg1
   

6. Turn all the required resources on and check the status of all the resources. Use the following commands for SB2.

   omf tell -a on -t sdr1-s1-lg1,sdr1-md1,rfdev2-1,rfdev2-2,srv1-lg1
   

   omf stat -t all
   

7. ssh to the server with option -Y for using GUI for our live demo.

   ssh -Y root@srv1-lg1
   

8. In all the ssh sessions for srv1-lg1, use the following to source the correct environment.

   source /opt/intel/oneapi/setvars.sh --force --config="/opt/intel/oneapi/renew-config.txt"
   

Experiment Execution

Find and prepare USRPs

• Upon logging into the server, set up the 10G data interfaces DATA1, DATA2 in terminal 1.

  ifconfig DATA1 10.117.1.1 netmask 255.255.0.0 mtu 9000 up
  ifconfig DATA2 10.118.1.1 netmask 255.255.0.0 mtu 9000 up
  

  sudo sysctl -w net.core.rmem_max=536870912
  sudo sysctl -w net.core.wmem_max=536870912
  

After running the above commands, you should see that the data interfaces have the appropriate IP addresses assigned.

root@srv1-lg1:~# ifconfig DATA1
DATA1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::1e34:daff:fe42:d4c  prefixlen 64  scopeid 0x20<link>
        ether 1c:34:da:42:0d:4c  txqueuelen 1000  (Ethernet)
        RX packets 21092  bytes 1881634 (1.8 MB)
        RX errors 0  dropped 19183  overruns 0  frame 0
        TX packets 686  bytes 204975 (204.9 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
root@srv1-lg1:~# ifconfig DATA2
DATA2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::1e34:daff:fe42:d4d  prefixlen 64  scopeid 0x20<link>
        ether 1c:34:da:42:0d:4d  txqueuelen 1000  (Ethernet)
        RX packets 21091  bytes 1881530 (1.8 MB)
        RX errors 0  dropped 19184  overruns 0  frame 0
        TX packets 690  bytes 226549 (226.5 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

• Run und_find_devices to make sure that both USRP N310s can be reached:

  [INFO] [UHD] linux; GNU C++ version 9.4.0; Boost_107100; UHD_4.1.0.HEAD-0-g25d617ca
  --------------------------------------------------
  -- UHD Device 3
  --------------------------------------------------
  Device Address:
      serial: 315A35A
      addr: 10.117.2.1
      claimed: False
      fpga: XG
      mgmt_addr: 10.116.2.1
      mgmt_addr: 10.117.2.1
      product: n310
      type: n3xx
  
  
  --------------------------------------------------
  -- UHD Device 4
  --------------------------------------------------
  Device Address:
      serial: 3176DF7
      addr: 10.118.3.1
      claimed: False
      fpga: XG
      mgmt_addr: 10.116.3.1
      mgmt_addr: 10.118.3.1
      product: n310
      type: n3xx
  

Configure IBM 28GHz PAAM

COSMOS uses the IBM 28GHz PAAM API to configure and initialize the PAAM boards. Under PAAM_Control, use the following command to configure the PAAM boards in terminal 1:

root@srv1-lg1:~/PAAM_Control# python3 main.py

The following message will print out to indicate that the PAAM board is being successfully configured:

Opened port to FPGA
Logged in to Petalinux
Started command parser on Zynq
sdpar_prog.py /version: Version is PAWR_v1.2.0
Using baseline FPGA control IP
Reset the Phased Array
Initialization of IC 0 was successful
Initialization of IC 1 was successful
Initialization of IC 2 was successful
Initialization of IC 3 was successful
IC0 current: 2.2629521016617793 status: On
IC1 current: 1.3685239491691104 status: On
IC2 current: 0.19550342130987292 status: Off
IC3 current: 0.07820136852394917 status: Off
Closed port to Zynq
Opened port to FPGA
Logged in to Petalinux
Started command parser on Zynq
sdpar_prog.py /version: Version is PAWR_v1.2.0
Using baseline FPGA control IP
Reset the Phased Array
Initialization of IC 0 was successful
Initialization of IC 1 was successful
Initialization of IC 2 was successful
Initialization of IC 3 was successful
IC0 current: 2.29227761485826 status: On
IC1 current: 1.3587487781036167 status: On
IC2 current: 0.15640273704789834 status: Off
IC3 current: 0.16617790811339198 status: Off
Closed port to Zynq
Experiment Started!

Notice this program will hang there to indicate that the PAAM board is on, if you wish to turn off the ICs on the PAAM boards, please press CTRL+C once.

Bring up real-time visualization

Please direct to the ~/Cubic23/Agora/files/log/csv folder, where you will be able to see 3 types Python visualization files. In terminal 2, use the following command to choose the visualization for the system.

• cubic_timeD.py: This visualization tool helps to visualize the raw IQ samples captured by Agora-UHD and the corresponding FFT.

  root@srv1-lg1:~/Cubic23/Agora/files/log/csv# taskset -c 31 python3 cubic_timeD.py
  

• cubic_conste.py: This visualization tool helps to visualize the constellation Agora-UHD system get after demodulating the received signals

  root@srv1-lg1:~/Cubic23/Agora/files/log/csv# taskset -c 32 python3 cubic_conste.py --SISO --QAM16
  

--SISO/--MIMO chooses the mode to plot for either SISO case or MIMO case, --QAM16/--QAM64 plots the corresponding reference point for different modulation types.

• cubic_mimo.py and cubic.py: This visualization tool helps to visualize the EVM, SNR, and BER readings for the Agora-UHD system.

  root@srv1-lg1:~/Cubic23/Agora/files/log/csv# taskset -c 33 python3 cubic_mimo.py
  

We use taskset to specify dedicated cores to run the visualization tools to improve the Agora-UHD performance.

Run the experiment

In terminal 3, bring up the UE as:

root@srv1-lg1:~/Cubic23/Agora# ./build/user --conf_file files/config/examples/ul-usrp-cubic.json

Once the UE finishes initializing, UE will be in waiting mode constantly checking for beacon signals send out by BS.

In terminal 4, bring up BS as:

root@srv1-lg1:~/Cubic23/Agora# ./build/agora --conf_file files/config/examples/ul-usrp-cubic.json

You