wiki:Tutorials/4G5G/weekshall

Version 2 (modified by prasanthi, 2 years ago) ( diff )

—

Site Navigation

  1. COSMOS Testbed Overview
    1. Concepts
    1. Testbed Workflow
    1. Availability and Resource Status
    1. Events and Conferences
  6. Getting Started
    1. Make an Account
    2. Create and Configure SSH Keys
    3. Make a Reservation
    4. Log in to your Reservation
    5. Control Resources with OMF
    6. Run a Hello World Experiment
    7. Get Help and Support
  7. User Guide
    1. Policies
    1. Account Creation
    1. Scheduling and Reservations
    1. Disk Images
    1. Frequently Asked Questions
    1. Resource Control with OMF
    1. Remote Access
    1. Chrome Remote Desktop Setup Page
    1. Measurement & Result Collection
    1. Storage
    1. Support
    1. Contributing to the Wiki
  20. Tutorials
    1. SDR and Wireless
    2. Optical Networking
    3. Wired Networking
    4. Edge Computing
    5. 4G/5G Systems
    6. Orchestration Platforms
  21. Architecture
    1. Data Flow
    1. Deployment Map
    1. Domains
    1. Naming Convention
    1. Networks
    1. Optical
  28. Resources, Services and APIs
    1. RF Control
    2. SDR Control
    3. Compute Control
    4. Network Control
    5. Optical Control
  29. Datasets
  30. Hardware Info
    1. Cameras
    1. Compute
    1. Network
    1. Nodes
    1. Optical
    1. RF Subsystems
    1. Antennas
    1. Full-Duplex Radio
    1. RF Front End
    1. Software Defined Radios (SDR)
  41. RF Policies & Compliance
    1. Outdoor Radio Frequency Allocation
    2. Program Experiment License
    3. Spectrum Monitoring
    4. Emergency Stop Procedures
    5. Network and Platform Security

Amarisoft 4G/5G System in weekshall.cosmos

Description

This tutorial contains instructions for setting up a 4G/5G network in weekshall.cosmos domain. Amarisoft software based eNb/gNb, MME run on the USRP-2974

Prerequisites

In order to access the test bed, create a reservation and have it approved by the reservation service. Access to the resources is granted after the reservation is confirmed. Please follow the process shown on the COSMOS getting started page to get started.

Resources required

1 USRP-2974, 1 COSMOS node with SIM8200 modem. in ​COSMOS Weeks hall domain

Tutorial Setup

Follow the steps below to gain access to the Weeks hall console and set up nodes with appropriate images.

  1. If you don't have one already, sign up for a ​COSMOS account
  2. Create a resource reservation on sandbox 1
  3. Login into sandbox 1 console (console.sb1.cosmos-lab.org) with two SSH sessions.
  4. Make sure all the resources in the domain are turned off: 
    omf tell -a offh -t system:topo:allres
    For this tutorial we will be using a USRP-2974 sdr2-s1-lg1 and a COSMOS node srv1-in1. srv1-in1 has a ​Waveshare SIM8200 modem attached over USB.
  5. Load amarisoft-2974.ndz on sdr2-s1-lg1 
    omf load -i amarisoft-2974.ndz -t sdr2-s1-lg1

    omf load -i waveshare-sim8200.ndz -t srv1-in1
  6. Turn all the required resources on and check the status 
    omf tell -a on -t srv1-in1,sdr2-s1-lg1

    omf stat -t system:topo:allres
  7. ssh to the nodes, use option -Y for using GUI.
Note: See TracWiki for help on using the wiki.