wiki:Tutorials/Wireless/mmwavePaamRealTimePHY

Version 6 (modified by zhenzhou77, 2 months ago) ( diff )

—

Site Navigation

  1. COSMOS Testbed Overview
    1. Concepts
    1. Testbed Workflow
    1. Availability and Resource Status
    1. Events and Conferences
  6. Getting Started
    1. Make an Account
    2. Create and Configure SSH Keys
    3. Make a Reservation
    4. Log in to your Reservation
    5. Control Resources with OMF
    6. Run a Hello World Experiment
    7. Get Help and Support
  7. User Guide
    1. Policies
    1. Account Creation
    1. Scheduling and Reservations
    1. Disk Images
    1. Frequently Asked Questions
    1. Resource Control with OMF
    1. Remote Access
    1. Chrome Remote Desktop Setup Page
    1. Measurement & Result Collection
    1. Storage
    1. Support
    1. Contributing to the Wiki
  20. Tutorials
    1. SDR and Wireless
    2. Optical Networking
    3. Wired Networking
    4. Edge Computing
    5. 4G/5G Systems
    6. Orchestration Platforms
  21. Architecture
    1. Data Flow
    1. Deployment Map
    1. Domains
    1. Naming Convention
    1. Networks
    1. Optical
  28. Resources, Services and APIs
    1. RF Control
    2. SDR Control
    3. Compute Control
    4. Network Control
    5. Optical Control
  29. Datasets
  30. Hardware Info
    1. Cameras
    1. Compute
    1. Network
    1. Nodes
    1. Optical
    1. RF Subsystems
    1. Antennas
    1. Full-Duplex Radio
    1. RF Front End
    1. Software Defined Radios (SDR)
  41. RF Policies & Compliance
    1. Outdoor Radio Frequency Allocation
    2. Program Experiment License
    3. Spectrum Monitoring
    4. Emergency Stop Procedures
    5. Network and Platform Security

Savannah: Efficient mmWave Baseband Processing with Minimal and Heterogeneous Resources

Description

In this tutorial, we demonstrate Savannah, a framework for efficient mmWave baseband processing with minimal and heterogeneous resources.

  • The instructions for Savannah software can be found ​here under ​RENEW license.
  • The COSMOS team contributes to:
    • Adding the UHD support for the Agora software under the ​UHD license;
    • Updating DSP pipeline (Equalization; Demodulation);
    • Integrating ACC100 BBDEV acceleration for Decoding.

We thank the RENEW team for their support and help throughout the process.

The following papers describes the integration of the IBM 28 GHz PAAMs with Savannah in the COSMOS testbed. We would appreciate it if you cite this paper when publishing results obtained using the PAAMs deployed in COSMOS.

  • Z. Qi, Z. Gao, C. Tung, and T. Chen, "Programmable Millimeter-Wave MIMO Radios with Real-Time Baseband Processing". in Proc. ACM Mobi Com'23 Workshop on Wireless Network Testbeds, Experimental evaluation & Characterization (WiNTECH '23), 2023
  • Z. Qi*, C. Tung*, A. Kalia, and T. Chen, "Savannah: Efficient mmWave Baseband Processing with Minimal and Heterogeneous Resources". in Proc. 30th Annual International Conference on Mobile Computing and Networking (Mobi Com'24), 2024

Authors:
Zhenzhou (Tom) Qi, Duke University <zhenzhou.qi[at]duke[dot]edu>
Chung-Hsuan Tung, Duke University <chunghsuan.tung[at]duke[dot]edu>
Zhihui Gao, Duke University <zhihui.gao[at]duke[dot]edu>
Tingjun Chen, Duke University <tingjun.chen[at]duke[dot]edu>

Last updated: Sep. 11, 2024

Prerequisites

In order to access COSMOS-SB2, create a reservation in COSMOS testbed and have it approved by the reservation service. Access to the resources is granted after the reservation is confirmed. Please follow the process shown on the COSMOS getting ​started page to get started.

Resources Required

  • 2 USRP N310 SDRs (sdr1-s1-lg1 and sdr1-md1 in SB2)
  • 2 IBM 28GHz PAAMs (rfdev2-1 and rfdev2-2 in SB2 )
  • 1 Server (srv1-lg1)

The current hardware connection in SB2 as shown below

  • sdr1-s1-lg1 RF2 TX/RX — rfdev2-1 IC0/TX/H, sdr1-s1-lg1 RF2 RX2 — rfdev2-1 IC1/RX/H
  • sdr1-s1-lg1 RF3 TX/RX — rfdev2-1 IC0/TX/V, sdr1-s1-lg1 RF3 RX2 — rfdev2-1 IC1/RX/V
  • sdr1-md1 RF2 TX/RX — rfdev2-2 IC0/TX/H, sdr1-md1 RF2 RX2 — rfdev2-2 IC1/RX/H
  • sdr1-md1 RF3 TX/RX — rfdev2-2 IC0/TX/V, sdr1-md1 RF2 RX2 — rfdev2-2 IC1/RX/V

Attachments (3)

Note: See TracWiki for help on using the wiki.